文件大小上传 修改

XHWK.Model/Model_Video.cs

     public enum Enum_VideoType
     {
         MP4 = 1,
-        FlV = 2,
+        FLV = 2,
         AVI = 3
     }
 

XHWK.Model/Properties/AssemblyInfo.cs

 //可以指定所有这些值，也可以使用“生成号”和“修订号”的默认值
 //通过使用 "*"，如下所示:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("1.0.0.0")]
-[assembly: AssemblyFileVersion("1.0.0.0")]
+[assembly: AssemblyVersion("1.0.9.0")]
+[assembly: AssemblyFileVersion("1.0.9.0")]

XHWK.WKTool/App.config

     <!--上传每片大小 Mb-->
     <add key="UploadSliceLen" value="1"/>
     <!--版本号-->
-    <add key="VersionCode" value="8"/>
-    <add key="VersionName" value="1.0.7"/>
+    <add key="VersionCode" value="10"/>
+    <add key="VersionName" value="1.0.9"/>
     
   </appSettings>
 </configuration>

XHWK.WKTool/XHMicroLessonSystemWindow.xaml

                 <Grid>
                     <StackPanel Orientation="Horizontal"   HorizontalAlignment="Center"
                     VerticalAlignment="Center">
-                        <TextBox IsEnabled="{Binding IsEnabled}"
+                        <TextBox IsEnabled="{Binding IsEnabled,Mode=TwoWay}"
                     HorizontalAlignment="Center"
                     VerticalAlignment="Center"
                     FontSize="16" Height="30" Padding="0,5,0,0"

XHWK.WKTool/XHMicroLessonSystemWindow.xaml.cs

         {
             if (IsModify)
             {
+                try
+                {
+                    bool isName = ModifyPathName(pageData.menuList[Subscript].FileGuid, pageData.menuList[Subscript].VideoName, out string Errmessage);
+                    if (!isName)
+                    {
+                        MessageWindow.Show(Errmessage);
+                    }
+                }
+                catch (Exception ex)
+                {
+                    LogHelper.WriteErrLog("XHMicroLessonSystemWindow(BtnModify_Click)" + ex.Message, ex);
+                }
+                IsModify = false;
                 pageData.menuList[Subscript].IsEnabled = false;
+                listView1.DataContext = pageData;
             }
-            List<System.Windows.Controls.Button> buttons = FindChilds<System.Windows.Controls.Button>(listView1, "btnModify");
-            for (int i = 0; i < buttons.Count; i++)
+            else
             {
-                if (buttons[i] == sender)
+                List<System.Windows.Controls.Button> buttons = FindChilds<System.Windows.Controls.Button>(listView1, "btnModify");
+                for (int i = 0; i < buttons.Count; i++)
                 {
-                    pageData.menuList[i].IsEnabled = true;
-                    Subscript = i;
-                    IsModify = true;
+                    if (buttons[i] == sender)
+                    {
+                        pageData.menuList[i].IsEnabled = true;
+                        Subscript = i;
+                        IsModify = true;
+                    }
                 }
             }
+         
         }
 
         private int MouseNumber = 0;
         private bool ModifyPathName(string FileGuid, string NewName, out string Errmessage)
         {
             Errmessage = "";
-            Model_Video model_Video = APP.VideoList.Find(x => x.FileGuid == FileGuid);
-            string filePathName = model_Video.VideoPath;
-            string filePath = FileToolsCommon.GetDirectoryName(filePathName);
-            string newFilePathName = filePath + NewName;
-            //缩略图
-            string ThumbnailPath = filePath + "ThumbnailPath/";
-            FileToolsCommon.CreateDirectory(ThumbnailPath);
-            //缩略图存储位置
-            string ThumbnailPathName = ThumbnailPath + NewName.Replace(".", "") + ".JPG";
-            if (FileToolsCommon.IsExistFile(newFilePathName))
-            {
-                Errmessage = "文件已存在，请重新修改文件名！";
-                return false;
-            }
-            else
+            foreach(Model_WKData WKData in APP.WKDataList)
             {
-                //修改文件名
-                FileToolsCommon.Copy(filePathName, newFilePathName);
-                model_Video.VideoPath = newFilePathName;
-                //修改缩略图名
-                FileToolsCommon.DeleteFile(ThumbnailPathName);
-                FileToolsCommon.Copy(model_Video.ThumbnailPath, ThumbnailPathName);
-                model_Video.ThumbnailPath = ThumbnailPathName;
-                APP.SaveWkData();
-                return true;
+                if (WKData.VideoList.Exists(x => x.FileGuid == FileGuid))
+                {
+
+                    Model_Video model_Video = WKData.VideoList.Find(x => x.FileGuid == FileGuid);
+
+                    string filePathName = model_Video.VideoPath;
+                    string filePath = FileToolsCommon.GetDirectoryName(filePathName);
+                    string newFilePathName = filePath + NewName;
+                    //缩略图
+                    string ThumbnailPath = filePath + "ThumbnailPath/";
+                    FileToolsCommon.CreateDirectory(ThumbnailPath);
+                    //缩略图存储位置
+                    string ThumbnailPathName = ThumbnailPath + NewName.Replace(".", "") + ".JPG";
+                    if (FileToolsCommon.IsExistFile(newFilePathName))
+                    {
+                        Errmessage = "文件已存在，请重新修改文件名！";
+                        return false;
+                    }
+                    else
+                    {
+                        //修改文件名
+                        FileToolsCommon.Copy(filePathName, newFilePathName);
+                        model_Video.VideoPath = newFilePathName;
+                        //修改缩略图名
+                        FileToolsCommon.DeleteFile(ThumbnailPathName);
+                        FileToolsCommon.Copy(model_Video.ThumbnailPath, ThumbnailPathName);
+                        model_Video.ThumbnailPath = ThumbnailPathName;
+                        APP.SaveWkData();
+                        return true;
+                    }
+                }
+                else
+                {
+                    continue;
+                }
             }
+            Errmessage = "视频文件有改动，当前文件不存在，请关闭后重新打开“我的”";
+            return false;
         }
 
         #endregion