zhaoyaoyao
/
XHZBPC


			
							123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839
							<!DOCTYPE html>
<html lang="en">
  <head>
    <meta charset="utf-8" />
    <meta http-equiv="X-UA-Compatible" content="IE=edge" />
    <title>FFmpeg documentation</title>
    <link rel="stylesheet" href="bootstrap.min.css" />
    <link rel="stylesheet" href="style.min.css" />

<meta name="description" content="FFmpeg FAQ: ">
<meta name="keywords" content="FFmpeg documentation : FFmpeg FAQ: ">
<meta name="Generator" content="texi2html 5.0">
<!-- Created on March 9, 2020 by texi2html 5.0 -->
<!--
texi2html was written by: 
            Lionel Cons <Lionel.Cons@cern.ch> (original author)
            Karl Berry  <karl@freefriends.org>
            Olaf Bachmann <obachman@mathematik.uni-kl.de>
            and many others.
Maintained by: Many creative people.
Send bugs and suggestions to <texi2html-bug@nongnu.org>

-->
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
  </head>
  <body>
    <div class="container">

<h1 class="titlefont">FFmpeg FAQ</h1>
<hr>
<a name="SEC_Top"></a>

<a name="SEC_Contents"></a>
<h1>Table of Contents</h1>

<div class="contents">

<ul class="no-bullet">
  <li><a name="toc-General-Questions" href="#General-Questions">1 General Questions</a>
  <ul class="no-bullet">
    <li><a name="toc-Why-doesn_0027t-FFmpeg-support-feature-_005bxyz_005d_003f" href="#Why-doesn_0027t-FFmpeg-support-feature-_005bxyz_005d_003f">1.1 Why doesn&rsquo;t FFmpeg support feature [xyz]?</a></li>
    <li><a name="toc-FFmpeg-does-not-support-codec-XXX_002e-Can-you-include-a-Windows-DLL-loader-to-support-it_003f" href="#FFmpeg-does-not-support-codec-XXX_002e-Can-you-include-a-Windows-DLL-loader-to-support-it_003f">1.2 FFmpeg does not support codec XXX. Can you include a Windows DLL loader to support it?</a></li>
    <li><a name="toc-I-cannot-read-this-file-although-this-format-seems-to-be-supported-by-ffmpeg_002e" href="#I-cannot-read-this-file-although-this-format-seems-to-be-supported-by-ffmpeg_002e">1.3 I cannot read this file although this format seems to be supported by ffmpeg.</a></li>
    <li><a name="toc-Which-codecs-are-supported-by-Windows_003f" href="#Which-codecs-are-supported-by-Windows_003f">1.4 Which codecs are supported by Windows?</a></li>
  </ul></li>
  <li><a name="toc-Compilation" href="#Compilation">2 Compilation</a>
  <ul class="no-bullet">
    <li><a name="toc-error_003a-can_0027t-find-a-register-in-class-_0027GENERAL_005fREGS_0027-while-reloading-_0027asm_0027" href="#error_003a-can_0027t-find-a-register-in-class-_0027GENERAL_005fREGS_0027-while-reloading-_0027asm_0027">2.1 <code>error: can't find a register in class 'GENERAL_REGS' while reloading 'asm'</code></a></li>
    <li><a name="toc-I-have-installed-this-library-with-my-distro_0027s-package-manager_002e-Why-does-configure-not-see-it_003f" href="#I-have-installed-this-library-with-my-distro_0027s-package-manager_002e-Why-does-configure-not-see-it_003f">2.2 I have installed this library with my distro&rsquo;s package manager. Why does <code>configure</code> not see it?</a></li>
    <li><a name="toc-How-do-I-make-pkg_002dconfig-find-my-libraries_003f" href="#How-do-I-make-pkg_002dconfig-find-my-libraries_003f">2.3 How do I make <code>pkg-config</code> find my libraries?</a></li>
    <li><a name="toc-How-do-I-use-pkg_002dconfig-when-cross_002dcompiling_003f" href="#How-do-I-use-pkg_002dconfig-when-cross_002dcompiling_003f">2.4 How do I use <code>pkg-config</code> when cross-compiling?</a></li>
  </ul></li>
  <li><a name="toc-Usage" href="#Usage">3 Usage</a>
  <ul class="no-bullet">
    <li><a name="toc-ffmpeg-does-not-work_003b-what-is-wrong_003f" href="#ffmpeg-does-not-work_003b-what-is-wrong_003f">3.1 ffmpeg does not work; what is wrong?</a></li>
    <li><a name="toc-How-do-I-encode-single-pictures-into-movies_003f" href="#How-do-I-encode-single-pictures-into-movies_003f">3.2 How do I encode single pictures into movies?</a></li>
    <li><a name="toc-How-do-I-encode-movie-to-single-pictures_003f" href="#How-do-I-encode-movie-to-single-pictures_003f">3.3 How do I encode movie to single pictures?</a></li>
    <li><a name="toc-Why-do-I-see-a-slight-quality-degradation-with-multithreaded-MPEG_002a-encoding_003f" href="#Why-do-I-see-a-slight-quality-degradation-with-multithreaded-MPEG_002a-encoding_003f">3.4 Why do I see a slight quality degradation with multithreaded MPEG* encoding?</a></li>
    <li><a name="toc-How-can-I-read-from-the-standard-input-or-write-to-the-standard-output_003f" href="#How-can-I-read-from-the-standard-input-or-write-to-the-standard-output_003f">3.5 How can I read from the standard input or write to the standard output?</a></li>
    <li><a name="toc-_002df-jpeg-doesn_0027t-work_002e" href="#g_t_002df-jpeg-doesn_0027t-work_002e">3.6 -f jpeg doesn&rsquo;t work.</a></li>
    <li><a name="toc-Why-can-I-not-change-the-frame-rate_003f" href="#Why-can-I-not-change-the-frame-rate_003f">3.7 Why can I not change the frame rate?</a></li>
    <li><a name="toc-How-do-I-encode-Xvid-or-DivX-video-with-ffmpeg_003f" href="#How-do-I-encode-Xvid-or-DivX-video-with-ffmpeg_003f">3.8 How do I encode Xvid or DivX video with ffmpeg?</a></li>
    <li><a name="toc-Which-are-good-parameters-for-encoding-high-quality-MPEG_002d4_003f" href="#Which-are-good-parameters-for-encoding-high-quality-MPEG_002d4_003f">3.9 Which are good parameters for encoding high quality MPEG-4?</a></li>
    <li><a name="toc-Which-are-good-parameters-for-encoding-high-quality-MPEG_002d1_002fMPEG_002d2_003f" href="#Which-are-good-parameters-for-encoding-high-quality-MPEG_002d1_002fMPEG_002d2_003f">3.10 Which are good parameters for encoding high quality MPEG-1/MPEG-2?</a></li>
    <li><a name="toc-Interlaced-video-looks-very-bad-when-encoded-with-ffmpeg_002c-what-is-wrong_003f" href="#Interlaced-video-looks-very-bad-when-encoded-with-ffmpeg_002c-what-is-wrong_003f">3.11 Interlaced video looks very bad when encoded with ffmpeg, what is wrong?</a></li>
    <li><a name="toc-How-can-I-read-DirectShow-files_003f" href="#How-can-I-read-DirectShow-files_003f">3.12 How can I read DirectShow files?</a></li>
    <li><a name="toc-How-can-I-join-video-files_003f" href="#How-can-I-join-video-files_003f">3.13 How can I join video files?</a></li>
    <li><a name="toc-How-can-I-concatenate-video-files_003f" href="#How-can-I-concatenate-video-files_003f">3.14 How can I concatenate video files?</a>
    <ul class="no-bullet">
      <li><a name="toc-Concatenating-using-the-concat-filter" href="#Concatenating-using-the-concat-filter">3.14.1 Concatenating using the concat <em>filter</em></a></li>
      <li><a name="toc-Concatenating-using-the-concat-demuxer" href="#Concatenating-using-the-concat-demuxer">3.14.2 Concatenating using the concat <em>demuxer</em></a></li>
      <li><a name="toc-Concatenating-using-the-concat-protocol-_0028file-level_0029" href="#Concatenating-using-the-concat-protocol-_0028file-level_0029">3.14.3 Concatenating using the concat <em>protocol</em> (file level)</a></li>
      <li><a name="toc-Concatenating-using-raw-audio-and-video" href="#Concatenating-using-raw-audio-and-video">3.14.4 Concatenating using raw audio and video</a></li>
    </ul></li>
    <li><a name="toc-Using-_002df-lavfi_002c-audio-becomes-mono-for-no-apparent-reason_002e" href="#Using-_002df-lavfi_002c-audio-becomes-mono-for-no-apparent-reason_002e">3.15 Using &lsquo;<samp>-f lavfi</samp>&rsquo;, audio becomes mono for no apparent reason.</a></li>
    <li><a name="toc-Why-does-FFmpeg-not-see-the-subtitles-in-my-VOB-file_003f" href="#Why-does-FFmpeg-not-see-the-subtitles-in-my-VOB-file_003f">3.16 Why does FFmpeg not see the subtitles in my VOB file?</a></li>
    <li><a name="toc-Why-was-the-ffmpeg-_002dsameq-option-removed_003f-What-to-use-instead_003f" href="#Why-was-the-ffmpeg-_002dsameq-option-removed_003f-What-to-use-instead_003f">3.17 Why was the <code>ffmpeg</code> &lsquo;<samp>-sameq</samp>&rsquo; option removed? What to use instead?</a></li>
    <li><a name="toc-I-have-a-stretched-video_002c-why-does-scaling-does-not-fix-it_003f" href="#I-have-a-stretched-video_002c-why-does-scaling-does-not-fix-it_003f">3.18 I have a stretched video, why does scaling does not fix it?</a></li>
    <li><a name="toc-How-do-I-run-ffmpeg-as-a-background-task_003f" href="#How-do-I-run-ffmpeg-as-a-background-task_003f">3.19 How do I run ffmpeg as a background task?</a></li>
    <li><a name="toc-How-do-I-prevent-ffmpeg-from-suspending-with-a-message-like-suspended-_0028tty-output_0029_003f" href="#How-do-I-prevent-ffmpeg-from-suspending-with-a-message-like-suspended-_0028tty-output_0029_003f">3.20 How do I prevent ffmpeg from suspending with a message like <em>suspended (tty output)</em>?</a></li>
  </ul></li>
  <li><a name="toc-Development" href="#Development">4 Development</a>
  <ul class="no-bullet">
    <li><a name="toc-Are-there-examples-illustrating-how-to-use-the-FFmpeg-libraries_002c-particularly-libavcodec-and-libavformat_003f" href="#Are-there-examples-illustrating-how-to-use-the-FFmpeg-libraries_002c-particularly-libavcodec-and-libavformat_003f">4.1 Are there examples illustrating how to use the FFmpeg libraries, particularly libavcodec and libavformat?</a></li>
    <li><a name="toc-Can-you-support-my-C-compiler-XXX_003f" href="#Can-you-support-my-C-compiler-XXX_003f">4.2 Can you support my C compiler XXX?</a></li>
    <li><a name="toc-Is-Microsoft-Visual-C_002b_002b-supported_003f" href="#Is-Microsoft-Visual-C_002b_002b-supported_003f">4.3 Is Microsoft Visual C++ supported?</a></li>
    <li><a name="toc-Can-you-add-automake_002c-libtool-or-autoconf-support_003f" href="#Can-you-add-automake_002c-libtool-or-autoconf-support_003f">4.4 Can you add automake, libtool or autoconf support?</a></li>
    <li><a name="toc-Why-not-rewrite-FFmpeg-in-object_002doriented-C_002b_002b_003f" href="#Why-not-rewrite-FFmpeg-in-object_002doriented-C_002b_002b_003f">4.5 Why not rewrite FFmpeg in object-oriented C++?</a></li>
    <li><a name="toc-Why-are-the-ffmpeg-programs-devoid-of-debugging-symbols_003f" href="#Why-are-the-ffmpeg-programs-devoid-of-debugging-symbols_003f">4.6 Why are the ffmpeg programs devoid of debugging symbols?</a></li>
    <li><a name="toc-I-do-not-like-the-LGPL_002c-can-I-contribute-code-under-the-GPL-instead_003f" href="#I-do-not-like-the-LGPL_002c-can-I-contribute-code-under-the-GPL-instead_003f">4.7 I do not like the LGPL, can I contribute code under the GPL instead?</a></li>
    <li><a name="toc-I_0027m-using-FFmpeg-from-within-my-C-application-but-the-linker-complains-about-missing-symbols-from-the-libraries-themselves_002e" href="#I_0027m-using-FFmpeg-from-within-my-C-application-but-the-linker-complains-about-missing-symbols-from-the-libraries-themselves_002e">4.8 I&rsquo;m using FFmpeg from within my C application but the linker complains about missing symbols from the libraries themselves.</a></li>
    <li><a name="toc-I_0027m-using-FFmpeg-from-within-my-C_002b_002b-application-but-the-linker-complains-about-missing-symbols-which-seem-to-be-available_002e" href="#I_0027m-using-FFmpeg-from-within-my-C_002b_002b-application-but-the-linker-complains-about-missing-symbols-which-seem-to-be-available_002e">4.9 I&rsquo;m using FFmpeg from within my C++ application but the linker complains about missing symbols which seem to be available.</a></li>
    <li><a name="toc-I_0027m-using-libavutil-from-within-my-C_002b_002b-application-but-the-compiler-complains-about-_0027UINT64_005fC_0027-was-not-declared-in-this-scope" href="#I_0027m-using-libavutil-from-within-my-C_002b_002b-application-but-the-compiler-complains-about-_0027UINT64_005fC_0027-was-not-declared-in-this-scope">4.10 I&rsquo;m using libavutil from within my C++ application but the compiler complains about &rsquo;UINT64_C&rsquo; was not declared in this scope</a></li>
    <li><a name="toc-I-have-a-file-in-memory-_002f-a-API-different-from-_002aopen_002f_002aread_002f-libc-how-do-I-use-it-with-libavformat_003f" href="#I-have-a-file-in-memory-_002f-a-API-different-from-_002aopen_002f_002aread_002f-libc-how-do-I-use-it-with-libavformat_003f">4.11 I have a file in memory / a API different from *open/*read/ libc how do I use it with libavformat?</a></li>
    <li><a name="toc-Where-is-the-documentation-about-ffv1_002c-msmpeg4_002c-asv1_002c-4xm_003f" href="#Where-is-the-documentation-about-ffv1_002c-msmpeg4_002c-asv1_002c-4xm_003f">4.12 Where is the documentation about ffv1, msmpeg4, asv1, 4xm?</a></li>
    <li><a name="toc-How-do-I-feed-H_002e263_002dRTP-_0028and-other-codecs-in-RTP_0029-to-libavcodec_003f" href="#How-do-I-feed-H_002e263_002dRTP-_0028and-other-codecs-in-RTP_0029-to-libavcodec_003f">4.13 How do I feed H.263-RTP (and other codecs in RTP) to libavcodec?</a></li>
    <li><a name="toc-AVStream_002er_005fframe_005frate-is-wrong_002c-it-is-much-larger-than-the-frame-rate_002e" href="#AVStream_002er_005fframe_005frate-is-wrong_002c-it-is-much-larger-than-the-frame-rate_002e">4.14 AVStream.r_frame_rate is wrong, it is much larger than the frame rate.</a></li>
    <li><a name="toc-Why-is-make-fate-not-running-all-tests_003f" href="#Why-is-make-fate-not-running-all-tests_003f">4.15 Why is <code>make fate</code> not running all tests?</a></li>
    <li><a name="toc-Why-is-make-fate-not-finding-the-samples_003f" href="#Why-is-make-fate-not-finding-the-samples_003f">4.16 Why is <code>make fate</code> not finding the samples?</a></li>
  </ul>
</li>
</ul>
</div>


<hr size="6">
<a name="General-Questions"></a>
<h1 class="chapter"><a href="faq.html#toc-General-Questions">1 General Questions</a></h1>

<a name="Why-doesn_0027t-FFmpeg-support-feature-_005bxyz_005d_003f"></a>
<h2 class="section"><a href="faq.html#toc-Why-doesn_0027t-FFmpeg-support-feature-_005bxyz_005d_003f">1.1 Why doesn&rsquo;t FFmpeg support feature [xyz]?</a></h2>

<p>Because no one has taken on that task yet. FFmpeg development is
driven by the tasks that are important to the individual developers.
If there is a feature that is important to you, the best way to get
it implemented is to undertake the task yourself or sponsor a developer.
</p>
<a name="FFmpeg-does-not-support-codec-XXX_002e-Can-you-include-a-Windows-DLL-loader-to-support-it_003f"></a>
<h2 class="section"><a href="faq.html#toc-FFmpeg-does-not-support-codec-XXX_002e-Can-you-include-a-Windows-DLL-loader-to-support-it_003f">1.2 FFmpeg does not support codec XXX. Can you include a Windows DLL loader to support it?</a></h2>

<p>No. Windows DLLs are not portable, bloated and often slow.
Moreover FFmpeg strives to support all codecs natively.
A DLL loader is not conducive to that goal.
</p>
<a name="I-cannot-read-this-file-although-this-format-seems-to-be-supported-by-ffmpeg_002e"></a>
<h2 class="section"><a href="faq.html#toc-I-cannot-read-this-file-although-this-format-seems-to-be-supported-by-ffmpeg_002e">1.3 I cannot read this file although this format seems to be supported by ffmpeg.</a></h2>

<p>Even if ffmpeg can read the container format, it may not support all its
codecs. Please consult the supported codec list in the ffmpeg
documentation.
</p>
<a name="Which-codecs-are-supported-by-Windows_003f"></a>
<h2 class="section"><a href="faq.html#toc-Which-codecs-are-supported-by-Windows_003f">1.4 Which codecs are supported by Windows?</a></h2>

<p>Windows does not support standard formats like MPEG very well, unless you
install some additional codecs.
</p>
<p>The following list of video codecs should work on most Windows systems:
</p><dl compact="compact">
<dt>&lsquo;<samp>msmpeg4v2</samp>&rsquo;</dt>
<dd><p>.avi/.asf
</p></dd>
<dt>&lsquo;<samp>msmpeg4</samp>&rsquo;</dt>
<dd><p>.asf only
</p></dd>
<dt>&lsquo;<samp>wmv1</samp>&rsquo;</dt>
<dd><p>.asf only
</p></dd>
<dt>&lsquo;<samp>wmv2</samp>&rsquo;</dt>
<dd><p>.asf only
</p></dd>
<dt>&lsquo;<samp>mpeg4</samp>&rsquo;</dt>
<dd><p>Only if you have some MPEG-4 codec like ffdshow or Xvid installed.
</p></dd>
<dt>&lsquo;<samp>mpeg1video</samp>&rsquo;</dt>
<dd><p>.mpg only
</p></dd>
</dl>
<p>Note, ASF files often have .wmv or .wma extensions in Windows. It should also
be mentioned that Microsoft claims a patent on the ASF format, and may sue
or threaten users who create ASF files with non-Microsoft software. It is
strongly advised to avoid ASF where possible.
</p>
<p>The following list of audio codecs should work on most Windows systems:
</p><dl compact="compact">
<dt>&lsquo;<samp>adpcm_ima_wav</samp>&rsquo;</dt>
<dt>&lsquo;<samp>adpcm_ms</samp>&rsquo;</dt>
<dt>&lsquo;<samp>pcm_s16le</samp>&rsquo;</dt>
<dd><p>always
</p></dd>
<dt>&lsquo;<samp>libmp3lame</samp>&rsquo;</dt>
<dd><p>If some MP3 codec like LAME is installed.
</p></dd>
</dl>


<a name="Compilation"></a>
<h1 class="chapter"><a href="faq.html#toc-Compilation">2 Compilation</a></h1>

<a name="error_003a-can_0027t-find-a-register-in-class-_0027GENERAL_005fREGS_0027-while-reloading-_0027asm_0027"></a>
<h2 class="section"><a href="faq.html#toc-error_003a-can_0027t-find-a-register-in-class-_0027GENERAL_005fREGS_0027-while-reloading-_0027asm_0027">2.1 <code>error: can't find a register in class 'GENERAL_REGS' while reloading 'asm'</code></a></h2>

<p>This is a bug in gcc. Do not report it to us. Instead, please report it to
the gcc developers. Note that we will not add workarounds for gcc bugs.
</p>
<p>Also note that (some of) the gcc developers believe this is not a bug or
not a bug they should fix:
<a href="https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11203">https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11203</a>.
Then again, some of them do not know the difference between an undecidable
problem and an NP-hard problem...
</p>
<a name="I-have-installed-this-library-with-my-distro_0027s-package-manager_002e-Why-does-configure-not-see-it_003f"></a>
<h2 class="section"><a href="faq.html#toc-I-have-installed-this-library-with-my-distro_0027s-package-manager_002e-Why-does-configure-not-see-it_003f">2.2 I have installed this library with my distro&rsquo;s package manager. Why does <code>configure</code> not see it?</a></h2>

<p>Distributions usually split libraries in several packages. The main package
contains the files necessary to run programs using the library. The
development package contains the files necessary to build programs using the
library. Sometimes, docs and/or data are in a separate package too.
</p>
<p>To build FFmpeg, you need to install the development package. It is usually
called &lsquo;<tt>libfoo-dev</tt>&rsquo; or &lsquo;<tt>libfoo-devel</tt>&rsquo;. You can remove it after the
build is finished, but be sure to keep the main package.
</p>
<a name="How-do-I-make-pkg_002dconfig-find-my-libraries_003f"></a>
<h2 class="section"><a href="faq.html#toc-How-do-I-make-pkg_002dconfig-find-my-libraries_003f">2.3 How do I make <code>pkg-config</code> find my libraries?</a></h2>

<p>Somewhere along with your libraries, there is a &lsquo;<tt>.pc</tt>&rsquo; file (or several)
in a &lsquo;<tt>pkgconfig</tt>&rsquo; directory. You need to set environment variables to
point <code>pkg-config</code> to these files.
</p>
<p>If you need to <em>add</em> directories to <code>pkg-config</code>&rsquo;s search list
(typical use case: library installed separately), add it to
<code>$PKG_CONFIG_PATH</code>:
</p>
<div class="example">
<pre class="example">export PKG_CONFIG_PATH=/opt/x264/lib/pkgconfig:/opt/opus/lib/pkgconfig
</pre></div>

<p>If you need to <em>replace</em> <code>pkg-config</code>&rsquo;s search list
(typical use case: cross-compiling), set it in
<code>$PKG_CONFIG_LIBDIR</code>:
</p>
<div class="example">
<pre class="example">export PKG_CONFIG_LIBDIR=/home/me/cross/usr/lib/pkgconfig:/home/me/cross/usr/local/lib/pkgconfig
</pre></div>

<p>If you need to know the library&rsquo;s internal dependencies (typical use: static
linking), add the <code>--static</code> option to <code>pkg-config</code>:
</p>
<div class="example">
<pre class="example">./configure --pkg-config-flags=--static
</pre></div>

<a name="How-do-I-use-pkg_002dconfig-when-cross_002dcompiling_003f"></a>
<h2 class="section"><a href="faq.html#toc-How-do-I-use-pkg_002dconfig-when-cross_002dcompiling_003f">2.4 How do I use <code>pkg-config</code> when cross-compiling?</a></h2>

<p>The best way is to install <code>pkg-config</code> in your cross-compilation
environment. It will automatically use the cross-compilation libraries.
</p>
<p>You can also use <code>pkg-config</code> from the host environment by
specifying explicitly <code>--pkg-config=pkg-config</code> to <code>configure</code>.
In that case, you must point <code>pkg-config</code> to the correct directories
using the <code>PKG_CONFIG_LIBDIR</code>, as explained in the previous entry.
</p>
<p>As an intermediate solution, you can place in your cross-compilation
environment a script that calls the host <code>pkg-config</code> with
<code>PKG_CONFIG_LIBDIR</code> set. That script can look like that:
</p>
<div class="example">
<pre class="example">#!/bin/sh
PKG_CONFIG_LIBDIR=/path/to/cross/lib/pkgconfig
export PKG_CONFIG_LIBDIR
exec /usr/bin/pkg-config &quot;$@&quot;
</pre></div>

<a name="Usage"></a>
<h1 class="chapter"><a href="faq.html#toc-Usage">3 Usage</a></h1>

<a name="ffmpeg-does-not-work_003b-what-is-wrong_003f"></a>
<h2 class="section"><a href="faq.html#toc-ffmpeg-does-not-work_003b-what-is-wrong_003f">3.1 ffmpeg does not work; what is wrong?</a></h2>

<p>Try a <code>make distclean</code> in the ffmpeg source directory before the build.
If this does not help see
(<a href="https://ffmpeg.org/bugreports.html">https://ffmpeg.org/bugreports.html</a>).
</p>
<a name="How-do-I-encode-single-pictures-into-movies_003f"></a>
<h2 class="section"><a href="faq.html#toc-How-do-I-encode-single-pictures-into-movies_003f">3.2 How do I encode single pictures into movies?</a></h2>

<p>First, rename your pictures to follow a numerical sequence.
For example, img1.jpg, img2.jpg, img3.jpg,...
Then you may run:
</p>
<div class="example">
<pre class="example">ffmpeg -f image2 -i img%d.jpg /tmp/a.mpg
</pre></div>

<p>Notice that &lsquo;<samp>%d</samp>&rsquo; is replaced by the image number.
</p>
<p>&lsquo;<tt>img%03d.jpg</tt>&rsquo; means the sequence &lsquo;<tt>img001.jpg</tt>&rsquo;, &lsquo;<tt>img002.jpg</tt>&rsquo;, etc.
</p>
<p>Use the &lsquo;<samp>-start_number</samp>&rsquo; option to declare a starting number for
the sequence. This is useful if your sequence does not start with
&lsquo;<tt>img001.jpg</tt>&rsquo; but is still in a numerical order. The following
example will start with &lsquo;<tt>img100.jpg</tt>&rsquo;:
</p>
<div class="example">
<pre class="example">ffmpeg -f image2 -start_number 100 -i img%d.jpg /tmp/a.mpg
</pre></div>

<p>If you have large number of pictures to rename, you can use the
following command to ease the burden. The command, using the bourne
shell syntax, symbolically links all files in the current directory
that match <code>*jpg</code> to the &lsquo;<tt>/tmp</tt>&rsquo; directory in the sequence of
&lsquo;<tt>img001.jpg</tt>&rsquo;, &lsquo;<tt>img002.jpg</tt>&rsquo; and so on.
</p>
<div class="example">
<pre class="example">x=1; for i in *jpg; do counter=$(printf %03d $x); ln -s &quot;$i&quot; /tmp/img&quot;$counter&quot;.jpg; x=$(($x+1)); done
</pre></div>

<p>If you want to sequence them by oldest modified first, substitute
<code>$(ls -r -t *jpg)</code> in place of <code>*jpg</code>.
</p>
<p>Then run:
</p>
<div class="example">
<pre class="example">ffmpeg -f image2 -i /tmp/img%03d.jpg /tmp/a.mpg
</pre></div>

<p>The same logic is used for any image format that ffmpeg reads.
</p>
<p>You can also use <code>cat</code> to pipe images to ffmpeg:
</p>
<div class="example">
<pre class="example">cat *.jpg | ffmpeg -f image2pipe -c:v mjpeg -i - output.mpg
</pre></div>

<a name="How-do-I-encode-movie-to-single-pictures_003f"></a>
<h2 class="section"><a href="faq.html#toc-How-do-I-encode-movie-to-single-pictures_003f">3.3 How do I encode movie to single pictures?</a></h2>

<p>Use:
</p>
<div class="example">
<pre class="example">ffmpeg -i movie.mpg movie%d.jpg
</pre></div>

<p>The &lsquo;<tt>movie.mpg</tt>&rsquo; used as input will be converted to
&lsquo;<tt>movie1.jpg</tt>&rsquo;, &lsquo;<tt>movie2.jpg</tt>&rsquo;, etc...
</p>
<p>Instead of relying on file format self-recognition, you may also use
</p><dl compact="compact">
<dt>&lsquo;<samp>-c:v ppm</samp>&rsquo;</dt>
<dt>&lsquo;<samp>-c:v png</samp>&rsquo;</dt>
<dt>&lsquo;<samp>-c:v mjpeg</samp>&rsquo;</dt>
</dl>
<p>to force the encoding.
</p>
<p>Applying that to the previous example:
</p><div class="example">
<pre class="example">ffmpeg -i movie.mpg -f image2 -c:v mjpeg menu%d.jpg
</pre></div>

<p>Beware that there is no &quot;jpeg&quot; codec. Use &quot;mjpeg&quot; instead.
</p>
<a name="Why-do-I-see-a-slight-quality-degradation-with-multithreaded-MPEG_002a-encoding_003f"></a>
<h2 class="section"><a href="faq.html#toc-Why-do-I-see-a-slight-quality-degradation-with-multithreaded-MPEG_002a-encoding_003f">3.4 Why do I see a slight quality degradation with multithreaded MPEG* encoding?</a></h2>

<p>For multithreaded MPEG* encoding, the encoded slices must be independent,
otherwise thread n would practically have to wait for n-1 to finish, so it&rsquo;s
quite logical that there is a small reduction of quality. This is not a bug.
</p>
<a name="How-can-I-read-from-the-standard-input-or-write-to-the-standard-output_003f"></a>
<h2 class="section"><a href="faq.html#toc-How-can-I-read-from-the-standard-input-or-write-to-the-standard-output_003f">3.5 How can I read from the standard input or write to the standard output?</a></h2>

<p>Use &lsquo;<tt>-</tt>&rsquo; as file name.
</p>
<a name="g_t_002df-jpeg-doesn_0027t-work_002e"></a>
<h2 class="section"><a href="faq.html#toc-_002df-jpeg-doesn_0027t-work_002e">3.6 -f jpeg doesn&rsquo;t work.</a></h2>

<p>Try &rsquo;-f image2 test%d.jpg&rsquo;.
</p>
<a name="Why-can-I-not-change-the-frame-rate_003f"></a>
<h2 class="section"><a href="faq.html#toc-Why-can-I-not-change-the-frame-rate_003f">3.7 Why can I not change the frame rate?</a></h2>

<p>Some codecs, like MPEG-1/2, only allow a small number of fixed frame rates.
Choose a different codec with the -c:v command line option.
</p>
<a name="How-do-I-encode-Xvid-or-DivX-video-with-ffmpeg_003f"></a>
<h2 class="section"><a href="faq.html#toc-How-do-I-encode-Xvid-or-DivX-video-with-ffmpeg_003f">3.8 How do I encode Xvid or DivX video with ffmpeg?</a></h2>

<p>Both Xvid and DivX (version 4+) are implementations of the ISO MPEG-4
standard (note that there are many other coding formats that use this
same standard). Thus, use &rsquo;-c:v mpeg4&rsquo; to encode in these formats. The
default fourcc stored in an MPEG-4-coded file will be &rsquo;FMP4&rsquo;. If you want
a different fourcc, use the &rsquo;-vtag&rsquo; option. E.g., &rsquo;-vtag xvid&rsquo; will
force the fourcc &rsquo;xvid&rsquo; to be stored as the video fourcc rather than the
default.
</p>
<a name="Which-are-good-parameters-for-encoding-high-quality-MPEG_002d4_003f"></a>
<h2 class="section"><a href="faq.html#toc-Which-are-good-parameters-for-encoding-high-quality-MPEG_002d4_003f">3.9 Which are good parameters for encoding high quality MPEG-4?</a></h2>

<p>&rsquo;-mbd rd -flags +mv4+aic -trellis 2 -cmp 2 -subcmp 2 -g 300 -pass 1/2&rsquo;,
things to try: &rsquo;-bf 2&rsquo;, &rsquo;-mpv_flags qp_rd&rsquo;, &rsquo;-mpv_flags mv0&rsquo;, &rsquo;-mpv_flags skip_rd&rsquo;.
</p>
<a name="Which-are-good-parameters-for-encoding-high-quality-MPEG_002d1_002fMPEG_002d2_003f"></a>
<h2 class="section"><a href="faq.html#toc-Which-are-good-parameters-for-encoding-high-quality-MPEG_002d1_002fMPEG_002d2_003f">3.10 Which are good parameters for encoding high quality MPEG-1/MPEG-2?</a></h2>

<p>&rsquo;-mbd rd -trellis 2 -cmp 2 -subcmp 2 -g 100 -pass 1/2&rsquo;
but beware the &rsquo;-g 100&rsquo; might cause problems with some decoders.
Things to try: &rsquo;-bf 2&rsquo;, &rsquo;-mpv_flags qp_rd&rsquo;, &rsquo;-mpv_flags mv0&rsquo;, &rsquo;-mpv_flags skip_rd&rsquo;.
</p>
<a name="Interlaced-video-looks-very-bad-when-encoded-with-ffmpeg_002c-what-is-wrong_003f"></a>
<h2 class="section"><a href="faq.html#toc-Interlaced-video-looks-very-bad-when-encoded-with-ffmpeg_002c-what-is-wrong_003f">3.11 Interlaced video looks very bad when encoded with ffmpeg, what is wrong?</a></h2>

<p>You should use &rsquo;-flags +ilme+ildct&rsquo; and maybe &rsquo;-flags +alt&rsquo; for interlaced
material, and try &rsquo;-top 0/1&rsquo; if the result looks really messed-up.
</p>
<a name="How-can-I-read-DirectShow-files_003f"></a>
<h2 class="section"><a href="faq.html#toc-How-can-I-read-DirectShow-files_003f">3.12 How can I read DirectShow files?</a></h2>

<p>If you have built FFmpeg with <code>./configure --enable-avisynth</code>
(only possible on MinGW/Cygwin platforms),
then you may use any file that DirectShow can read as input.
</p>
<p>Just create an &quot;input.avs&quot; text file with this single line ...
</p><div class="example">
<pre class="example">DirectShowSource(&quot;C:\path to your file\yourfile.asf&quot;)
</pre></div>
<p>... and then feed that text file to ffmpeg:
</p><div class="example">
<pre class="example">ffmpeg -i input.avs
</pre></div>

<p>For ANY other help on AviSynth, please visit the
<a href="http://www.avisynth.org/">AviSynth homepage</a>.
</p>
<a name="How-can-I-join-video-files_003f"></a>
<h2 class="section"><a href="faq.html#toc-How-can-I-join-video-files_003f">3.13 How can I join video files?</a></h2>

<p>To &quot;join&quot; video files is quite ambiguous. The following list explains the
different kinds of &quot;joining&quot; and points out how those are addressed in
FFmpeg. To join video files may mean:
</p>
<ul>
<li>
To put them one after the other: this is called to <em>concatenate</em> them
(in short: concat) and is addressed
<a href="#How-can-I-concatenate-video-files">in this very faq</a>.

</li><li>
To put them together in the same file, to let the user choose between the
different versions (example: different audio languages): this is called to
<em>multiplex</em> them together (in short: mux), and is done by simply
invoking ffmpeg with several &lsquo;<samp>-i</samp>&rsquo; options.

</li><li>
For audio, to put all channels together in a single stream (example: two
mono streams into one stereo stream): this is sometimes called to
<em>merge</em> them, and can be done using the
<a href="ffmpeg-filters.html#amerge"><code>amerge</code></a> filter.

</li><li>
For audio, to play one on top of the other: this is called to <em>mix</em>
them, and can be done by first merging them into a single stream and then
using the <a href="ffmpeg-filters.html#pan"><code>pan</code></a> filter to mix
the channels at will.

</li><li>
For video, to display both together, side by side or one on top of a part of
the other; it can be done using the
<a href="ffmpeg-filters.html#overlay"><code>overlay</code></a> video filter.

</li></ul>

<p><a name="How-can-I-concatenate-video-files"></a>
</p><a name="How-can-I-concatenate-video-files_003f"></a>
<h2 class="section"><a href="faq.html#toc-How-can-I-concatenate-video-files_003f">3.14 How can I concatenate video files?</a></h2>

<p>There are several solutions, depending on the exact circumstances.
</p>
<a name="Concatenating-using-the-concat-filter"></a>
<h3 class="subsection"><a href="faq.html#toc-Concatenating-using-the-concat-filter">3.14.1 Concatenating using the concat <em>filter</em></a></h3>

<p>FFmpeg has a <a href="ffmpeg-filters.html#concat"><code>concat</code></a> filter designed specifically for that, with examples in the
documentation. This operation is recommended if you need to re-encode.
</p>
<a name="Concatenating-using-the-concat-demuxer"></a>
<h3 class="subsection"><a href="faq.html#toc-Concatenating-using-the-concat-demuxer">3.14.2 Concatenating using the concat <em>demuxer</em></a></h3>

<p>FFmpeg has a <a href="ffmpeg-formats.html#concat"><code>concat</code></a> demuxer which you can use when you want to avoid a re-encode and
your format doesn&rsquo;t support file level concatenation.
</p>
<a name="Concatenating-using-the-concat-protocol-_0028file-level_0029"></a>
<h3 class="subsection"><a href="faq.html#toc-Concatenating-using-the-concat-protocol-_0028file-level_0029">3.14.3 Concatenating using the concat <em>protocol</em> (file level)</a></h3>

<p>FFmpeg has a <a href="ffmpeg-protocols.html#concat"><code>concat</code></a> protocol designed specifically for that, with examples in the
documentation.
</p>
<p>A few multimedia containers (MPEG-1, MPEG-2 PS, DV) allow one to concatenate
video by merely concatenating the files containing them.
</p>
<p>Hence you may concatenate your multimedia files by first transcoding them to
these privileged formats, then using the humble <code>cat</code> command (or the
equally humble <code>copy</code> under Windows), and finally transcoding back to your
format of choice.
</p>
<div class="example">
<pre class="example">ffmpeg -i input1.avi -qscale:v 1 intermediate1.mpg
ffmpeg -i input2.avi -qscale:v 1 intermediate2.mpg
cat intermediate1.mpg intermediate2.mpg &gt; intermediate_all.mpg
ffmpeg -i intermediate_all.mpg -qscale:v 2 output.avi
</pre></div>

<p>Additionally, you can use the <code>concat</code> protocol instead of <code>cat</code> or
<code>copy</code> which will avoid creation of a potentially huge intermediate file.
</p>
<div class="example">
<pre class="example">ffmpeg -i input1.avi -qscale:v 1 intermediate1.mpg
ffmpeg -i input2.avi -qscale:v 1 intermediate2.mpg
ffmpeg -i concat:&quot;intermediate1.mpg|intermediate2.mpg&quot; -c copy intermediate_all.mpg
ffmpeg -i intermediate_all.mpg -qscale:v 2 output.avi
</pre></div>

<p>Note that you may need to escape the character &quot;|&quot; which is special for many
shells.
</p>
<p>Another option is usage of named pipes, should your platform support it:
</p>
<div class="example">
<pre class="example">mkfifo intermediate1.mpg
mkfifo intermediate2.mpg
ffmpeg -i input1.avi -qscale:v 1 -y intermediate1.mpg &lt; /dev/null &amp;
ffmpeg -i input2.avi -qscale:v 1 -y intermediate2.mpg &lt; /dev/null &amp;
cat intermediate1.mpg intermediate2.mpg |\
ffmpeg -f mpeg -i - -c:v mpeg4 -c:a libmp3lame output.avi
</pre></div>

<a name="Concatenating-using-raw-audio-and-video"></a>
<h3 class="subsection"><a href="faq.html#toc-Concatenating-using-raw-audio-and-video">3.14.4 Concatenating using raw audio and video</a></h3>

<p>Similarly, the yuv4mpegpipe format, and the raw video, raw audio codecs also
allow concatenation, and the transcoding step is almost lossless.
When using multiple yuv4mpegpipe(s), the first line needs to be discarded
from all but the first stream. This can be accomplished by piping through
<code>tail</code> as seen below. Note that when piping through <code>tail</code> you
must use command grouping, <code>{  ;}</code>, to background properly.
</p>
<p>For example, let&rsquo;s say we want to concatenate two FLV files into an
output.flv file:
</p>
<div class="example">
<pre class="example">mkfifo temp1.a
mkfifo temp1.v
mkfifo temp2.a
mkfifo temp2.v
mkfifo all.a
mkfifo all.v
ffmpeg -i input1.flv -vn -f u16le -c:a pcm_s16le -ac 2 -ar 44100 - &gt; temp1.a &lt; /dev/null &amp;
ffmpeg -i input2.flv -vn -f u16le -c:a pcm_s16le -ac 2 -ar 44100 - &gt; temp2.a &lt; /dev/null &amp;
ffmpeg -i input1.flv -an -f yuv4mpegpipe - &gt; temp1.v &lt; /dev/null &amp;
{ ffmpeg -i input2.flv -an -f yuv4mpegpipe - &lt; /dev/null | tail -n +2 &gt; temp2.v ; } &amp;
cat temp1.a temp2.a &gt; all.a &amp;
cat temp1.v temp2.v &gt; all.v &amp;
ffmpeg -f u16le -c:a pcm_s16le -ac 2 -ar 44100 -i all.a \
       -f yuv4mpegpipe -i all.v \
       -y output.flv
rm temp[12].[av] all.[av]
</pre></div>

<a name="Using-_002df-lavfi_002c-audio-becomes-mono-for-no-apparent-reason_002e"></a>
<h2 class="section"><a href="faq.html#toc-Using-_002df-lavfi_002c-audio-becomes-mono-for-no-apparent-reason_002e">3.15 Using &lsquo;<samp>-f lavfi</samp>&rsquo;, audio becomes mono for no apparent reason.</a></h2>

<p>Use &lsquo;<samp>-dumpgraph -</samp>&rsquo; to find out exactly where the channel layout is
lost.
</p>
<p>Most likely, it is through <code>auto-inserted aresample</code>. Try to understand
why the converting filter was needed at that place.
</p>
<p>Just before the output is a likely place, as &lsquo;<samp>-f lavfi</samp>&rsquo; currently
only support packed S16.
</p>
<p>Then insert the correct <code>aformat</code> explicitly in the filtergraph,
specifying the exact format.
</p>
<div class="example">
<pre class="example">aformat=sample_fmts=s16:channel_layouts=stereo
</pre></div>

<a name="Why-does-FFmpeg-not-see-the-subtitles-in-my-VOB-file_003f"></a>
<h2 class="section"><a href="faq.html#toc-Why-does-FFmpeg-not-see-the-subtitles-in-my-VOB-file_003f">3.16 Why does FFmpeg not see the subtitles in my VOB file?</a></h2>

<p>VOB and a few other formats do not have a global header that describes
everything present in the file. Instead, applications are supposed to scan
the file to see what it contains. Since VOB files are frequently large, only
the beginning is scanned. If the subtitles happen only later in the file,
they will not be initially detected.
</p>
<p>Some applications, including the <code>ffmpeg</code> command-line tool, can only
work with streams that were detected during the initial scan; streams that
are detected later are ignored.
</p>
<p>The size of the initial scan is controlled by two options: <code>probesize</code>
(default ~5 Mo) and <code>analyzeduration</code> (default 5,000,000 µs = 5 s). For
the subtitle stream to be detected, both values must be large enough.
</p>
<a name="Why-was-the-ffmpeg-_002dsameq-option-removed_003f-What-to-use-instead_003f"></a>
<h2 class="section"><a href="faq.html#toc-Why-was-the-ffmpeg-_002dsameq-option-removed_003f-What-to-use-instead_003f">3.17 Why was the <code>ffmpeg</code> &lsquo;<samp>-sameq</samp>&rsquo; option removed? What to use instead?</a></h2>

<p>The &lsquo;<samp>-sameq</samp>&rsquo; option meant &quot;same quantizer&quot;, and made sense only in a
very limited set of cases. Unfortunately, a lot of people mistook it for
&quot;same quality&quot; and used it in places where it did not make sense: it had
roughly the expected visible effect, but achieved it in a very inefficient
way.
</p>
<p>Each encoder has its own set of options to set the quality-vs-size balance,
use the options for the encoder you are using to set the quality level to a
point acceptable for your tastes. The most common options to do that are
&lsquo;<samp>-qscale</samp>&rsquo; and &lsquo;<samp>-qmax</samp>&rsquo;, but you should peruse the documentation
of the encoder you chose.
</p>
<a name="I-have-a-stretched-video_002c-why-does-scaling-does-not-fix-it_003f"></a>
<h2 class="section"><a href="faq.html#toc-I-have-a-stretched-video_002c-why-does-scaling-does-not-fix-it_003f">3.18 I have a stretched video, why does scaling does not fix it?</a></h2>

<p>A lot of video codecs and formats can store the <em>aspect ratio</em> of the
video: this is the ratio between the width and the height of either the full
image (DAR, display aspect ratio) or individual pixels (SAR, sample aspect
ratio). For example, EGA screens at resolution 640×350 had 4:3 DAR and 35:48
SAR.
</p>
<p>Most still image processing work with square pixels, i.e. 1:1 SAR, but a lot
of video standards, especially from the analogic-numeric transition era, use
non-square pixels.
</p>
<p>Most processing filters in FFmpeg handle the aspect ratio to avoid
stretching the image: cropping adjusts the DAR to keep the SAR constant,
scaling adjusts the SAR to keep the DAR constant.
</p>
<p>If you want to stretch, or “unstretch”, the image, you need to override the
information with the
<a href="ffmpeg-filters.html#setdar_002c-setsar"><code>setdar or setsar filters</code></a>.
</p>
<p>Do not forget to examine carefully the original video to check whether the
stretching comes from the image or from the aspect ratio information.
</p>
<p>For example, to fix a badly encoded EGA capture, use the following commands,
either the first one to upscale to square pixels or the second one to set
the correct aspect ratio or the third one to avoid transcoding (may not work
depending on the format / codec / player / phase of the moon):
</p>
<div class="example">
<pre class="example">ffmpeg -i ega_screen.nut -vf scale=640:480,setsar=1 ega_screen_scaled.nut
ffmpeg -i ega_screen.nut -vf setdar=4/3 ega_screen_anamorphic.nut
ffmpeg -i ega_screen.nut -aspect 4/3 -c copy ega_screen_overridden.nut
</pre></div>

<p><a name="background-task"></a>
</p><a name="How-do-I-run-ffmpeg-as-a-background-task_003f"></a>
<h2 class="section"><a href="faq.html#toc-How-do-I-run-ffmpeg-as-a-background-task_003f">3.19 How do I run ffmpeg as a background task?</a></h2>

<p>ffmpeg normally checks the console input, for entries like &quot;q&quot; to stop
and &quot;?&quot; to give help, while performing operations. ffmpeg does not have a way of
detecting when it is running as a background task.
When it checks the console input, that can cause the process running ffmpeg
in the background to suspend.
</p>
<p>To prevent those input checks, allowing ffmpeg to run as a background task,
use the <a href="ffmpeg.html#stdin-option"><code>-nostdin</code> option</a>
in the ffmpeg invocation. This is effective whether you run ffmpeg in a shell
or invoke ffmpeg in its own process via an operating system API.
</p>
<p>As an alternative, when you are running ffmpeg in a shell, you can redirect
standard input to <code>/dev/null</code> (on Linux and macOS)
or <code>NUL</code> (on Windows). You can do this redirect either
on the ffmpeg invocation, or from a shell script which calls ffmpeg.
</p>
<p>For example:
</p>
<div class="example">
<pre class="example">ffmpeg -nostdin -i INPUT OUTPUT
</pre></div>

<p>or (on Linux, macOS, and other UNIX-like shells):
</p>
<div class="example">
<pre class="example">ffmpeg -i INPUT OUTPUT &lt;/dev/null
</pre></div>

<p>or (on Windows):
</p>
<div class="example">
<pre class="example">ffmpeg -i INPUT OUTPUT &lt;NUL
</pre></div>

<a name="How-do-I-prevent-ffmpeg-from-suspending-with-a-message-like-suspended-_0028tty-output_0029_003f"></a>
<h2 class="section"><a href="faq.html#toc-How-do-I-prevent-ffmpeg-from-suspending-with-a-message-like-suspended-_0028tty-output_0029_003f">3.20 How do I prevent ffmpeg from suspending with a message like <em>suspended (tty output)</em>?</a></h2>

<p>If you run ffmpeg in the background, you may find that its process suspends.
There may be a message like <em>suspended (tty output)</em>. The question is how
to prevent the process from being suspended.
</p>
<p>For example:
</p>
<div class="example">
<pre class="example">% ffmpeg -i INPUT OUTPUT &amp;&gt; ~/tmp/log.txt &amp;
[1] 93352
%
[1]  + suspended (tty output)  ffmpeg -i INPUT OUTPUT &amp;&gt;
</pre></div>

<p>The message &quot;tty output&quot; notwithstanding, the problem here is that
ffmpeg normally checks the console input when it runs. The operating system
detects this, and suspends the process until you can bring it to the
foreground and attend to it.
</p>
<p>The solution is to use the right techniques to tell ffmpeg not to consult
console input. You can use the
<a href="ffmpeg.html#stdin-option"><code>-nostdin</code> option</a>,
or redirect standard input with <code>&lt; /dev/null</code>.
See FAQ
<a href="#background-task"><em>How do I run ffmpeg as a background task?</em></a>
for details.
</p>
<a name="Development"></a>
<h1 class="chapter"><a href="faq.html#toc-Development">4 Development</a></h1>

<a name="Are-there-examples-illustrating-how-to-use-the-FFmpeg-libraries_002c-particularly-libavcodec-and-libavformat_003f"></a>
<h2 class="section"><a href="faq.html#toc-Are-there-examples-illustrating-how-to-use-the-FFmpeg-libraries_002c-particularly-libavcodec-and-libavformat_003f">4.1 Are there examples illustrating how to use the FFmpeg libraries, particularly libavcodec and libavformat?</a></h2>

<p>Yes. Check the &lsquo;<tt>doc/examples</tt>&rsquo; directory in the source
repository, also available online at:
<a href="https://github.com/FFmpeg/FFmpeg/tree/master/doc/examples">https://github.com/FFmpeg/FFmpeg/tree/master/doc/examples</a>.
</p>
<p>Examples are also installed by default, usually in
<code>$PREFIX/share/ffmpeg/examples</code>.
</p>
<p>Also you may read the Developers Guide of the FFmpeg documentation. Alternatively,
examine the source code for one of the many open source projects that
already incorporate FFmpeg at (<a href="projects.html">projects.html</a>).
</p>
<a name="Can-you-support-my-C-compiler-XXX_003f"></a>
<h2 class="section"><a href="faq.html#toc-Can-you-support-my-C-compiler-XXX_003f">4.2 Can you support my C compiler XXX?</a></h2>

<p>It depends. If your compiler is C99-compliant, then patches to support
it are likely to be welcome if they do not pollute the source code
with <code>#ifdef</code>s related to the compiler.
</p>
<a name="Is-Microsoft-Visual-C_002b_002b-supported_003f"></a>
<h2 class="section"><a href="faq.html#toc-Is-Microsoft-Visual-C_002b_002b-supported_003f">4.3 Is Microsoft Visual C++ supported?</a></h2>

<p>Yes. Please see the <a href="platform.html">Microsoft Visual C++</a>
section in the FFmpeg documentation.
</p>
<a name="Can-you-add-automake_002c-libtool-or-autoconf-support_003f"></a>
<h2 class="section"><a href="faq.html#toc-Can-you-add-automake_002c-libtool-or-autoconf-support_003f">4.4 Can you add automake, libtool or autoconf support?</a></h2>

<p>No. These tools are too bloated and they complicate the build.
</p>
<a name="Why-not-rewrite-FFmpeg-in-object_002doriented-C_002b_002b_003f"></a>
<h2 class="section"><a href="faq.html#toc-Why-not-rewrite-FFmpeg-in-object_002doriented-C_002b_002b_003f">4.5 Why not rewrite FFmpeg in object-oriented C++?</a></h2>

<p>FFmpeg is already organized in a highly modular manner and does not need to
be rewritten in a formal object language. Further, many of the developers
favor straight C; it works for them. For more arguments on this matter,
read <a href="https://web.archive.org/web/20111004021423/http://kernel.org/pub/linux/docs/lkml/#s15">&quot;Programming Religion&quot;</a>.
</p>
<a name="Why-are-the-ffmpeg-programs-devoid-of-debugging-symbols_003f"></a>
<h2 class="section"><a href="faq.html#toc-Why-are-the-ffmpeg-programs-devoid-of-debugging-symbols_003f">4.6 Why are the ffmpeg programs devoid of debugging symbols?</a></h2>

<p>The build process creates <code>ffmpeg_g</code>, <code>ffplay_g</code>, etc. which
contain full debug information. Those binaries are stripped to create
<code>ffmpeg</code>, <code>ffplay</code>, etc. If you need the debug information, use
the *_g versions.
</p>
<a name="I-do-not-like-the-LGPL_002c-can-I-contribute-code-under-the-GPL-instead_003f"></a>
<h2 class="section"><a href="faq.html#toc-I-do-not-like-the-LGPL_002c-can-I-contribute-code-under-the-GPL-instead_003f">4.7 I do not like the LGPL, can I contribute code under the GPL instead?</a></h2>

<p>Yes, as long as the code is optional and can easily and cleanly be placed
under #if CONFIG_GPL without breaking anything. So, for example, a new codec
or filter would be OK under GPL while a bug fix to LGPL code would not.
</p>
<a name="I_0027m-using-FFmpeg-from-within-my-C-application-but-the-linker-complains-about-missing-symbols-from-the-libraries-themselves_002e"></a>
<h2 class="section"><a href="faq.html#toc-I_0027m-using-FFmpeg-from-within-my-C-application-but-the-linker-complains-about-missing-symbols-from-the-libraries-themselves_002e">4.8 I&rsquo;m using FFmpeg from within my C application but the linker complains about missing symbols from the libraries themselves.</a></h2>

<p>FFmpeg builds static libraries by default. In static libraries, dependencies
are not handled. That has two consequences. First, you must specify the
libraries in dependency order: <code>-lavdevice</code> must come before
<code>-lavformat</code>, <code>-lavutil</code> must come after everything else, etc.
Second, external libraries that are used in FFmpeg have to be specified too.
</p>
<p>An easy way to get the full list of required libraries in dependency order
is to use <code>pkg-config</code>.
</p>
<div class="example">
<pre class="example">c99 -o program program.c $(pkg-config --cflags --libs libavformat libavcodec)
</pre></div>

<p>See &lsquo;<tt>doc/example/Makefile</tt>&rsquo; and &lsquo;<tt>doc/example/pc-uninstalled</tt>&rsquo; for
more details.
</p>
<a name="I_0027m-using-FFmpeg-from-within-my-C_002b_002b-application-but-the-linker-complains-about-missing-symbols-which-seem-to-be-available_002e"></a>
<h2 class="section"><a href="faq.html#toc-I_0027m-using-FFmpeg-from-within-my-C_002b_002b-application-but-the-linker-complains-about-missing-symbols-which-seem-to-be-available_002e">4.9 I&rsquo;m using FFmpeg from within my C++ application but the linker complains about missing symbols which seem to be available.</a></h2>

<p>FFmpeg is a pure C project, so to use the libraries within your C++ application
you need to explicitly state that you are using a C library. You can do this by
encompassing your FFmpeg includes using <code>extern &quot;C&quot;</code>.
</p>
<p>See <a href="http://www.parashift.com/c++-faq-lite/mixing-c-and-cpp.html#faq-32.3">http://www.parashift.com/c++-faq-lite/mixing-c-and-cpp.html#faq-32.3</a>
</p>
<a name="I_0027m-using-libavutil-from-within-my-C_002b_002b-application-but-the-compiler-complains-about-_0027UINT64_005fC_0027-was-not-declared-in-this-scope"></a>
<h2 class="section"><a href="faq.html#toc-I_0027m-using-libavutil-from-within-my-C_002b_002b-application-but-the-compiler-complains-about-_0027UINT64_005fC_0027-was-not-declared-in-this-scope">4.10 I&rsquo;m using libavutil from within my C++ application but the compiler complains about &rsquo;UINT64_C&rsquo; was not declared in this scope</a></h2>

<p>FFmpeg is a pure C project using C99 math features, in order to enable C++
to use them you have to append -D__STDC_CONSTANT_MACROS to your CXXFLAGS
</p>
<a name="I-have-a-file-in-memory-_002f-a-API-different-from-_002aopen_002f_002aread_002f-libc-how-do-I-use-it-with-libavformat_003f"></a>
<h2 class="section"><a href="faq.html#toc-I-have-a-file-in-memory-_002f-a-API-different-from-_002aopen_002f_002aread_002f-libc-how-do-I-use-it-with-libavformat_003f">4.11 I have a file in memory / a API different from *open/*read/ libc how do I use it with libavformat?</a></h2>

<p>You have to create a custom AVIOContext using <code>avio_alloc_context</code>,
see &lsquo;<tt>libavformat/aviobuf.c</tt>&rsquo; in FFmpeg and &lsquo;<tt>libmpdemux/demux_lavf.c</tt>&rsquo; in MPlayer or MPlayer2 sources.
</p>
<a name="Where-is-the-documentation-about-ffv1_002c-msmpeg4_002c-asv1_002c-4xm_003f"></a>
<h2 class="section"><a href="faq.html#toc-Where-is-the-documentation-about-ffv1_002c-msmpeg4_002c-asv1_002c-4xm_003f">4.12 Where is the documentation about ffv1, msmpeg4, asv1, 4xm?</a></h2>

<p>see <a href="https://www.ffmpeg.org/~michael/">https://www.ffmpeg.org/~michael/</a>
</p>
<a name="How-do-I-feed-H_002e263_002dRTP-_0028and-other-codecs-in-RTP_0029-to-libavcodec_003f"></a>
<h2 class="section"><a href="faq.html#toc-How-do-I-feed-H_002e263_002dRTP-_0028and-other-codecs-in-RTP_0029-to-libavcodec_003f">4.13 How do I feed H.263-RTP (and other codecs in RTP) to libavcodec?</a></h2>

<p>Even if peculiar since it is network oriented, RTP is a container like any
other. You have to <em>demux</em> RTP before feeding the payload to libavcodec.
In this specific case please look at RFC 4629 to see how it should be done.
</p>
<a name="AVStream_002er_005fframe_005frate-is-wrong_002c-it-is-much-larger-than-the-frame-rate_002e"></a>
<h2 class="section"><a href="faq.html#toc-AVStream_002er_005fframe_005frate-is-wrong_002c-it-is-much-larger-than-the-frame-rate_002e">4.14 AVStream.r_frame_rate is wrong, it is much larger than the frame rate.</a></h2>

<p><code>r_frame_rate</code> is NOT the average frame rate, it is the smallest frame rate
that can accurately represent all timestamps. So no, it is not
wrong if it is larger than the average!
For example, if you have mixed 25 and 30 fps content, then <code>r_frame_rate</code>
will be 150 (it is the least common multiple).
If you are looking for the average frame rate, see <code>AVStream.avg_frame_rate</code>.
</p>
<a name="Why-is-make-fate-not-running-all-tests_003f"></a>
<h2 class="section"><a href="faq.html#toc-Why-is-make-fate-not-running-all-tests_003f">4.15 Why is <code>make fate</code> not running all tests?</a></h2>

<p>Make sure you have the fate-suite samples and the <code>SAMPLES</code> Make variable
or <code>FATE_SAMPLES</code> environment variable or the <code>--samples</code>
<code>configure</code> option is set to the right path.
</p>
<a name="Why-is-make-fate-not-finding-the-samples_003f"></a>
<h2 class="section"><a href="faq.html#toc-Why-is-make-fate-not-finding-the-samples_003f">4.16 Why is <code>make fate</code> not finding the samples?</a></h2>

<p>Do you happen to have a <code>~</code> character in the samples path to indicate a
home directory? The value is used in ways where the shell cannot expand it,
causing FATE to not find files. Just replace <code>~</code> by the full path.
</p>
    </div>
  </body>
</html>