123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092109310941095109610971098109911001101110211031104110511061107110811091110111111121113111411151116111711181119112011211122112311241125112611271128112911301131113211331134113511361137113811391140114111421143114411451146114711481149115011511152115311541155115611571158115911601161116211631164116511661167116811691170117111721173117411751176117711781179118011811182118311841185118611871188118911901191119211931194119511961197119811991200120112021203120412051206120712081209121012111212121312141215121612171218121912201221122212231224122512261227122812291230123112321233123412351236123712381239124012411242124312441245124612471248124912501251125212531254125512561257125812591260126112621263126412651266126712681269127012711272127312741275127612771278127912801281128212831284128512861287128812891290129112921293129412951296129712981299130013011302130313041305130613071308130913101311131213131314131513161317131813191320132113221323132413251326132713281329133013311332133313341335133613371338133913401341134213431344134513461347134813491350135113521353135413551356135713581359136013611362136313641365136613671368136913701371137213731374137513761377137813791380138113821383138413851386138713881389139013911392139313941395139613971398139914001401140214031404140514061407140814091410141114121413141414151416141714181419142014211422142314241425142614271428142914301431143214331434143514361437143814391440144114421443144414451446144714481449145014511452145314541455145614571458145914601461146214631464146514661467146814691470147114721473147414751476147714781479148014811482148314841485148614871488148914901491149214931494149514961497149814991500 |
- <!DOCTYPE html>
- <html lang="en">
- <head>
- <meta charset="utf-8" />
- <meta http-equiv="X-UA-Compatible" content="IE=edge" />
- <title>FFmpeg documentation</title>
- <link rel="stylesheet" href="bootstrap.min.css" />
- <link rel="stylesheet" href="style.min.css" />
-
- <meta name="description" content="FFmpeg Utilities Documentation: ">
- <meta name="keywords" content="FFmpeg documentation : FFmpeg Utilities ">
- <meta name="Generator" content="texi2html 5.0">
- <!-- Created on March 9, 2020 by texi2html 5.0 -->
- <!--
- texi2html was written by:
- Lionel Cons <Lionel.Cons@cern.ch> (original author)
- Karl Berry <karl@freefriends.org>
- Olaf Bachmann <obachman@mathematik.uni-kl.de>
- and many others.
- Maintained by: Many creative people.
- Send bugs and suggestions to <texi2html-bug@nongnu.org>
-
- -->
- <meta http-equiv="Content-Type" content="text/html; charset=utf-8">
- </head>
- <body>
- <div class="container">
-
- <h1 class="titlefont">FFmpeg Utilities Documentation</h1>
- <hr>
- <a name="SEC_Top"></a>
-
- <a name="SEC_Contents"></a>
- <h1>Table of Contents</h1>
-
- <div class="contents">
-
- <ul class="no-bullet">
- <li><a name="toc-Description" href="#Description">1 Description</a></li>
- <li><a name="toc-Syntax" href="#Syntax">2 Syntax</a>
- <ul class="no-bullet">
- <li><a name="toc-Quoting-and-escaping" href="#Quoting-and-escaping">2.1 Quoting and escaping</a>
- <ul class="no-bullet">
- <li><a name="toc-Examples" href="#Examples">2.1.1 Examples</a></li>
- </ul></li>
- <li><a name="toc-Date" href="#Date">2.2 Date</a></li>
- <li><a name="toc-Time-duration" href="#Time-duration">2.3 Time duration</a>
- <ul class="no-bullet">
- <li><a name="toc-Examples-1" href="#Examples-1">2.3.1 Examples</a></li>
- </ul></li>
- <li><a name="toc-Video-size" href="#Video-size">2.4 Video size</a></li>
- <li><a name="toc-Video-rate" href="#Video-rate">2.5 Video rate</a></li>
- <li><a name="toc-Ratio" href="#Ratio">2.6 Ratio</a></li>
- <li><a name="toc-Color" href="#Color">2.7 Color</a></li>
- <li><a name="toc-Channel-Layout" href="#Channel-Layout">2.8 Channel Layout</a></li>
- </ul></li>
- <li><a name="toc-Expression-Evaluation" href="#Expression-Evaluation">3 Expression Evaluation</a></li>
- <li><a name="toc-See-Also" href="#See-Also">4 See Also</a></li>
- <li><a name="toc-Authors" href="#Authors">5 Authors</a></li>
- </ul>
- </div>
-
-
- <hr size="6">
- <a name="Description"></a>
- <h1 class="chapter"><a href="ffmpeg-utils.html#toc-Description">1 Description</a></h1>
-
- <p>This document describes some generic features and utilities provided
- by the libavutil library.
- </p>
-
- <a name="Syntax"></a>
- <h1 class="chapter"><a href="ffmpeg-utils.html#toc-Syntax">2 Syntax</a></h1>
-
- <p>This section documents the syntax and formats employed by the FFmpeg
- libraries and tools.
- </p>
- <p><a name="quoting_005fand_005fescaping"></a>
- </p><a name="Quoting-and-escaping"></a>
- <h2 class="section"><a href="ffmpeg-utils.html#toc-Quoting-and-escaping">2.1 Quoting and escaping</a></h2>
-
- <p>FFmpeg adopts the following quoting and escaping mechanism, unless
- explicitly specified. The following rules are applied:
- </p>
- <ul>
- <li>
- ‘<samp>'</samp>’ and ‘<samp>\</samp>’ are special characters (respectively used for
- quoting and escaping). In addition to them, there might be other
- special characters depending on the specific syntax where the escaping
- and quoting are employed.
-
- </li><li>
- A special character is escaped by prefixing it with a ‘<samp>\</samp>’.
-
- </li><li>
- All characters enclosed between ‘<samp>''</samp>’ are included literally in the
- parsed string. The quote character ‘<samp>'</samp>’ itself cannot be quoted,
- so you may need to close the quote and escape it.
-
- </li><li>
- Leading and trailing whitespaces, unless escaped or quoted, are
- removed from the parsed string.
- </li></ul>
-
- <p>Note that you may need to add a second level of escaping when using
- the command line or a script, which depends on the syntax of the
- adopted shell language.
- </p>
- <p>The function <code>av_get_token</code> defined in
- ‘<tt>libavutil/avstring.h</tt>’ can be used to parse a token quoted or
- escaped according to the rules defined above.
- </p>
- <p>The tool ‘<tt>tools/ffescape</tt>’ in the FFmpeg source tree can be used
- to automatically quote or escape a string in a script.
- </p>
- <a name="Examples"></a>
- <h3 class="subsection"><a href="ffmpeg-utils.html#toc-Examples">2.1.1 Examples</a></h3>
-
- <ul>
- <li>
- Escape the string <code>Crime d'Amour</code> containing the <code>'</code> special
- character:
- <div class="example">
- <pre class="example">Crime d\'Amour
- </pre></div>
-
- </li><li>
- The string above contains a quote, so the <code>'</code> needs to be escaped
- when quoting it:
- <div class="example">
- <pre class="example">'Crime d'\''Amour'
- </pre></div>
-
- </li><li>
- Include leading or trailing whitespaces using quoting:
- <div class="example">
- <pre class="example">' this string starts and ends with whitespaces '
- </pre></div>
-
- </li><li>
- Escaping and quoting can be mixed together:
- <div class="example">
- <pre class="example">' The string '\'string\'' is a string '
- </pre></div>
-
- </li><li>
- To include a literal ‘<samp>\</samp>’ you can use either escaping or quoting:
- <div class="example">
- <pre class="example">'c:\foo' can be written as c:\\foo
- </pre></div>
- </li></ul>
-
- <p><a name="date-syntax"></a>
- </p><a name="Date"></a>
- <h2 class="section"><a href="ffmpeg-utils.html#toc-Date">2.2 Date</a></h2>
-
- <p>The accepted syntax is:
- </p><div class="example">
- <pre class="example">[(YYYY-MM-DD|YYYYMMDD)[T|t| ]]((HH:MM:SS[.m...]]])|(HHMMSS[.m...]]]))[Z]
- now
- </pre></div>
-
- <p>If the value is "now" it takes the current time.
- </p>
- <p>Time is local time unless Z is appended, in which case it is
- interpreted as UTC.
- If the year-month-day part is not specified it takes the current
- year-month-day.
- </p>
- <p><a name="time-duration-syntax"></a>
- </p><a name="Time-duration"></a>
- <h2 class="section"><a href="ffmpeg-utils.html#toc-Time-duration">2.3 Time duration</a></h2>
-
- <p>There are two accepted syntaxes for expressing time duration.
- </p>
- <div class="example">
- <pre class="example">[-][<var>HH</var>:]<var>MM</var>:<var>SS</var>[.<var>m</var>...]
- </pre></div>
-
- <p><var>HH</var> expresses the number of hours, <var>MM</var> the number of minutes
- for a maximum of 2 digits, and <var>SS</var> the number of seconds for a
- maximum of 2 digits. The <var>m</var> at the end expresses decimal value for
- <var>SS</var>.
- </p>
- <p><em>or</em>
- </p>
- <div class="example">
- <pre class="example">[-]<var>S</var>+[.<var>m</var>...]
- </pre></div>
-
- <p><var>S</var> expresses the number of seconds, with the optional decimal part
- <var>m</var>.
- </p>
- <p>In both expressions, the optional ‘<samp>-</samp>’ indicates negative duration.
- </p>
- <a name="Examples-1"></a>
- <h3 class="subsection"><a href="ffmpeg-utils.html#toc-Examples-1">2.3.1 Examples</a></h3>
-
- <p>The following examples are all valid time duration:
- </p>
- <dl compact="compact">
- <dt>‘<samp>55</samp>’</dt>
- <dd><p>55 seconds
- </p>
- </dd>
- <dt>‘<samp>12:03:45</samp>’</dt>
- <dd><p>12 hours, 03 minutes and 45 seconds
- </p>
- </dd>
- <dt>‘<samp>23.189</samp>’</dt>
- <dd><p>23.189 seconds
- </p></dd>
- </dl>
-
- <p><a name="video-size-syntax"></a>
- </p><a name="Video-size"></a>
- <h2 class="section"><a href="ffmpeg-utils.html#toc-Video-size">2.4 Video size</a></h2>
- <p>Specify the size of the sourced video, it may be a string of the form
- <var>width</var>x<var>height</var>, or the name of a size abbreviation.
- </p>
- <p>The following abbreviations are recognized:
- </p><dl compact="compact">
- <dt>‘<samp>ntsc</samp>’</dt>
- <dd><p>720x480
- </p></dd>
- <dt>‘<samp>pal</samp>’</dt>
- <dd><p>720x576
- </p></dd>
- <dt>‘<samp>qntsc</samp>’</dt>
- <dd><p>352x240
- </p></dd>
- <dt>‘<samp>qpal</samp>’</dt>
- <dd><p>352x288
- </p></dd>
- <dt>‘<samp>sntsc</samp>’</dt>
- <dd><p>640x480
- </p></dd>
- <dt>‘<samp>spal</samp>’</dt>
- <dd><p>768x576
- </p></dd>
- <dt>‘<samp>film</samp>’</dt>
- <dd><p>352x240
- </p></dd>
- <dt>‘<samp>ntsc-film</samp>’</dt>
- <dd><p>352x240
- </p></dd>
- <dt>‘<samp>sqcif</samp>’</dt>
- <dd><p>128x96
- </p></dd>
- <dt>‘<samp>qcif</samp>’</dt>
- <dd><p>176x144
- </p></dd>
- <dt>‘<samp>cif</samp>’</dt>
- <dd><p>352x288
- </p></dd>
- <dt>‘<samp>4cif</samp>’</dt>
- <dd><p>704x576
- </p></dd>
- <dt>‘<samp>16cif</samp>’</dt>
- <dd><p>1408x1152
- </p></dd>
- <dt>‘<samp>qqvga</samp>’</dt>
- <dd><p>160x120
- </p></dd>
- <dt>‘<samp>qvga</samp>’</dt>
- <dd><p>320x240
- </p></dd>
- <dt>‘<samp>vga</samp>’</dt>
- <dd><p>640x480
- </p></dd>
- <dt>‘<samp>svga</samp>’</dt>
- <dd><p>800x600
- </p></dd>
- <dt>‘<samp>xga</samp>’</dt>
- <dd><p>1024x768
- </p></dd>
- <dt>‘<samp>uxga</samp>’</dt>
- <dd><p>1600x1200
- </p></dd>
- <dt>‘<samp>qxga</samp>’</dt>
- <dd><p>2048x1536
- </p></dd>
- <dt>‘<samp>sxga</samp>’</dt>
- <dd><p>1280x1024
- </p></dd>
- <dt>‘<samp>qsxga</samp>’</dt>
- <dd><p>2560x2048
- </p></dd>
- <dt>‘<samp>hsxga</samp>’</dt>
- <dd><p>5120x4096
- </p></dd>
- <dt>‘<samp>wvga</samp>’</dt>
- <dd><p>852x480
- </p></dd>
- <dt>‘<samp>wxga</samp>’</dt>
- <dd><p>1366x768
- </p></dd>
- <dt>‘<samp>wsxga</samp>’</dt>
- <dd><p>1600x1024
- </p></dd>
- <dt>‘<samp>wuxga</samp>’</dt>
- <dd><p>1920x1200
- </p></dd>
- <dt>‘<samp>woxga</samp>’</dt>
- <dd><p>2560x1600
- </p></dd>
- <dt>‘<samp>wqsxga</samp>’</dt>
- <dd><p>3200x2048
- </p></dd>
- <dt>‘<samp>wquxga</samp>’</dt>
- <dd><p>3840x2400
- </p></dd>
- <dt>‘<samp>whsxga</samp>’</dt>
- <dd><p>6400x4096
- </p></dd>
- <dt>‘<samp>whuxga</samp>’</dt>
- <dd><p>7680x4800
- </p></dd>
- <dt>‘<samp>cga</samp>’</dt>
- <dd><p>320x200
- </p></dd>
- <dt>‘<samp>ega</samp>’</dt>
- <dd><p>640x350
- </p></dd>
- <dt>‘<samp>hd480</samp>’</dt>
- <dd><p>852x480
- </p></dd>
- <dt>‘<samp>hd720</samp>’</dt>
- <dd><p>1280x720
- </p></dd>
- <dt>‘<samp>hd1080</samp>’</dt>
- <dd><p>1920x1080
- </p></dd>
- <dt>‘<samp>2k</samp>’</dt>
- <dd><p>2048x1080
- </p></dd>
- <dt>‘<samp>2kflat</samp>’</dt>
- <dd><p>1998x1080
- </p></dd>
- <dt>‘<samp>2kscope</samp>’</dt>
- <dd><p>2048x858
- </p></dd>
- <dt>‘<samp>4k</samp>’</dt>
- <dd><p>4096x2160
- </p></dd>
- <dt>‘<samp>4kflat</samp>’</dt>
- <dd><p>3996x2160
- </p></dd>
- <dt>‘<samp>4kscope</samp>’</dt>
- <dd><p>4096x1716
- </p></dd>
- <dt>‘<samp>nhd</samp>’</dt>
- <dd><p>640x360
- </p></dd>
- <dt>‘<samp>hqvga</samp>’</dt>
- <dd><p>240x160
- </p></dd>
- <dt>‘<samp>wqvga</samp>’</dt>
- <dd><p>400x240
- </p></dd>
- <dt>‘<samp>fwqvga</samp>’</dt>
- <dd><p>432x240
- </p></dd>
- <dt>‘<samp>hvga</samp>’</dt>
- <dd><p>480x320
- </p></dd>
- <dt>‘<samp>qhd</samp>’</dt>
- <dd><p>960x540
- </p></dd>
- <dt>‘<samp>2kdci</samp>’</dt>
- <dd><p>2048x1080
- </p></dd>
- <dt>‘<samp>4kdci</samp>’</dt>
- <dd><p>4096x2160
- </p></dd>
- <dt>‘<samp>uhd2160</samp>’</dt>
- <dd><p>3840x2160
- </p></dd>
- <dt>‘<samp>uhd4320</samp>’</dt>
- <dd><p>7680x4320
- </p></dd>
- </dl>
-
- <p><a name="video-rate-syntax"></a>
- </p><a name="Video-rate"></a>
- <h2 class="section"><a href="ffmpeg-utils.html#toc-Video-rate">2.5 Video rate</a></h2>
-
- <p>Specify the frame rate of a video, expressed as the number of frames
- generated per second. It has to be a string in the format
- <var>frame_rate_num</var>/<var>frame_rate_den</var>, an integer number, a float
- number or a valid video frame rate abbreviation.
- </p>
- <p>The following abbreviations are recognized:
- </p><dl compact="compact">
- <dt>‘<samp>ntsc</samp>’</dt>
- <dd><p>30000/1001
- </p></dd>
- <dt>‘<samp>pal</samp>’</dt>
- <dd><p>25/1
- </p></dd>
- <dt>‘<samp>qntsc</samp>’</dt>
- <dd><p>30000/1001
- </p></dd>
- <dt>‘<samp>qpal</samp>’</dt>
- <dd><p>25/1
- </p></dd>
- <dt>‘<samp>sntsc</samp>’</dt>
- <dd><p>30000/1001
- </p></dd>
- <dt>‘<samp>spal</samp>’</dt>
- <dd><p>25/1
- </p></dd>
- <dt>‘<samp>film</samp>’</dt>
- <dd><p>24/1
- </p></dd>
- <dt>‘<samp>ntsc-film</samp>’</dt>
- <dd><p>24000/1001
- </p></dd>
- </dl>
-
- <p><a name="ratio-syntax"></a>
- </p><a name="Ratio"></a>
- <h2 class="section"><a href="ffmpeg-utils.html#toc-Ratio">2.6 Ratio</a></h2>
-
- <p>A ratio can be expressed as an expression, or in the form
- <var>numerator</var>:<var>denominator</var>.
- </p>
- <p>Note that a ratio with infinite (1/0) or negative value is
- considered valid, so you should check on the returned value if you
- want to exclude those values.
- </p>
- <p>The undefined value can be expressed using the "0:0" string.
- </p>
- <p><a name="color-syntax"></a>
- </p><a name="Color"></a>
- <h2 class="section"><a href="ffmpeg-utils.html#toc-Color">2.7 Color</a></h2>
-
- <p>It can be the name of a color as defined below (case insensitive match) or a
- <code>[0x|#]RRGGBB[AA]</code> sequence, possibly followed by @ and a string
- representing the alpha component.
- </p>
- <p>The alpha component may be a string composed by "0x" followed by an
- hexadecimal number or a decimal number between 0.0 and 1.0, which
- represents the opacity value (‘<samp>0x00</samp>’ or ‘<samp>0.0</samp>’ means completely
- transparent, ‘<samp>0xff</samp>’ or ‘<samp>1.0</samp>’ completely opaque). If the alpha
- component is not specified then ‘<samp>0xff</samp>’ is assumed.
- </p>
- <p>The string ‘<samp>random</samp>’ will result in a random color.
- </p>
- <p>The following names of colors are recognized:
- </p><dl compact="compact">
- <dt>‘<samp>AliceBlue</samp>’</dt>
- <dd><p>0xF0F8FF
- </p></dd>
- <dt>‘<samp>AntiqueWhite</samp>’</dt>
- <dd><p>0xFAEBD7
- </p></dd>
- <dt>‘<samp>Aqua</samp>’</dt>
- <dd><p>0x00FFFF
- </p></dd>
- <dt>‘<samp>Aquamarine</samp>’</dt>
- <dd><p>0x7FFFD4
- </p></dd>
- <dt>‘<samp>Azure</samp>’</dt>
- <dd><p>0xF0FFFF
- </p></dd>
- <dt>‘<samp>Beige</samp>’</dt>
- <dd><p>0xF5F5DC
- </p></dd>
- <dt>‘<samp>Bisque</samp>’</dt>
- <dd><p>0xFFE4C4
- </p></dd>
- <dt>‘<samp>Black</samp>’</dt>
- <dd><p>0x000000
- </p></dd>
- <dt>‘<samp>BlanchedAlmond</samp>’</dt>
- <dd><p>0xFFEBCD
- </p></dd>
- <dt>‘<samp>Blue</samp>’</dt>
- <dd><p>0x0000FF
- </p></dd>
- <dt>‘<samp>BlueViolet</samp>’</dt>
- <dd><p>0x8A2BE2
- </p></dd>
- <dt>‘<samp>Brown</samp>’</dt>
- <dd><p>0xA52A2A
- </p></dd>
- <dt>‘<samp>BurlyWood</samp>’</dt>
- <dd><p>0xDEB887
- </p></dd>
- <dt>‘<samp>CadetBlue</samp>’</dt>
- <dd><p>0x5F9EA0
- </p></dd>
- <dt>‘<samp>Chartreuse</samp>’</dt>
- <dd><p>0x7FFF00
- </p></dd>
- <dt>‘<samp>Chocolate</samp>’</dt>
- <dd><p>0xD2691E
- </p></dd>
- <dt>‘<samp>Coral</samp>’</dt>
- <dd><p>0xFF7F50
- </p></dd>
- <dt>‘<samp>CornflowerBlue</samp>’</dt>
- <dd><p>0x6495ED
- </p></dd>
- <dt>‘<samp>Cornsilk</samp>’</dt>
- <dd><p>0xFFF8DC
- </p></dd>
- <dt>‘<samp>Crimson</samp>’</dt>
- <dd><p>0xDC143C
- </p></dd>
- <dt>‘<samp>Cyan</samp>’</dt>
- <dd><p>0x00FFFF
- </p></dd>
- <dt>‘<samp>DarkBlue</samp>’</dt>
- <dd><p>0x00008B
- </p></dd>
- <dt>‘<samp>DarkCyan</samp>’</dt>
- <dd><p>0x008B8B
- </p></dd>
- <dt>‘<samp>DarkGoldenRod</samp>’</dt>
- <dd><p>0xB8860B
- </p></dd>
- <dt>‘<samp>DarkGray</samp>’</dt>
- <dd><p>0xA9A9A9
- </p></dd>
- <dt>‘<samp>DarkGreen</samp>’</dt>
- <dd><p>0x006400
- </p></dd>
- <dt>‘<samp>DarkKhaki</samp>’</dt>
- <dd><p>0xBDB76B
- </p></dd>
- <dt>‘<samp>DarkMagenta</samp>’</dt>
- <dd><p>0x8B008B
- </p></dd>
- <dt>‘<samp>DarkOliveGreen</samp>’</dt>
- <dd><p>0x556B2F
- </p></dd>
- <dt>‘<samp>Darkorange</samp>’</dt>
- <dd><p>0xFF8C00
- </p></dd>
- <dt>‘<samp>DarkOrchid</samp>’</dt>
- <dd><p>0x9932CC
- </p></dd>
- <dt>‘<samp>DarkRed</samp>’</dt>
- <dd><p>0x8B0000
- </p></dd>
- <dt>‘<samp>DarkSalmon</samp>’</dt>
- <dd><p>0xE9967A
- </p></dd>
- <dt>‘<samp>DarkSeaGreen</samp>’</dt>
- <dd><p>0x8FBC8F
- </p></dd>
- <dt>‘<samp>DarkSlateBlue</samp>’</dt>
- <dd><p>0x483D8B
- </p></dd>
- <dt>‘<samp>DarkSlateGray</samp>’</dt>
- <dd><p>0x2F4F4F
- </p></dd>
- <dt>‘<samp>DarkTurquoise</samp>’</dt>
- <dd><p>0x00CED1
- </p></dd>
- <dt>‘<samp>DarkViolet</samp>’</dt>
- <dd><p>0x9400D3
- </p></dd>
- <dt>‘<samp>DeepPink</samp>’</dt>
- <dd><p>0xFF1493
- </p></dd>
- <dt>‘<samp>DeepSkyBlue</samp>’</dt>
- <dd><p>0x00BFFF
- </p></dd>
- <dt>‘<samp>DimGray</samp>’</dt>
- <dd><p>0x696969
- </p></dd>
- <dt>‘<samp>DodgerBlue</samp>’</dt>
- <dd><p>0x1E90FF
- </p></dd>
- <dt>‘<samp>FireBrick</samp>’</dt>
- <dd><p>0xB22222
- </p></dd>
- <dt>‘<samp>FloralWhite</samp>’</dt>
- <dd><p>0xFFFAF0
- </p></dd>
- <dt>‘<samp>ForestGreen</samp>’</dt>
- <dd><p>0x228B22
- </p></dd>
- <dt>‘<samp>Fuchsia</samp>’</dt>
- <dd><p>0xFF00FF
- </p></dd>
- <dt>‘<samp>Gainsboro</samp>’</dt>
- <dd><p>0xDCDCDC
- </p></dd>
- <dt>‘<samp>GhostWhite</samp>’</dt>
- <dd><p>0xF8F8FF
- </p></dd>
- <dt>‘<samp>Gold</samp>’</dt>
- <dd><p>0xFFD700
- </p></dd>
- <dt>‘<samp>GoldenRod</samp>’</dt>
- <dd><p>0xDAA520
- </p></dd>
- <dt>‘<samp>Gray</samp>’</dt>
- <dd><p>0x808080
- </p></dd>
- <dt>‘<samp>Green</samp>’</dt>
- <dd><p>0x008000
- </p></dd>
- <dt>‘<samp>GreenYellow</samp>’</dt>
- <dd><p>0xADFF2F
- </p></dd>
- <dt>‘<samp>HoneyDew</samp>’</dt>
- <dd><p>0xF0FFF0
- </p></dd>
- <dt>‘<samp>HotPink</samp>’</dt>
- <dd><p>0xFF69B4
- </p></dd>
- <dt>‘<samp>IndianRed</samp>’</dt>
- <dd><p>0xCD5C5C
- </p></dd>
- <dt>‘<samp>Indigo</samp>’</dt>
- <dd><p>0x4B0082
- </p></dd>
- <dt>‘<samp>Ivory</samp>’</dt>
- <dd><p>0xFFFFF0
- </p></dd>
- <dt>‘<samp>Khaki</samp>’</dt>
- <dd><p>0xF0E68C
- </p></dd>
- <dt>‘<samp>Lavender</samp>’</dt>
- <dd><p>0xE6E6FA
- </p></dd>
- <dt>‘<samp>LavenderBlush</samp>’</dt>
- <dd><p>0xFFF0F5
- </p></dd>
- <dt>‘<samp>LawnGreen</samp>’</dt>
- <dd><p>0x7CFC00
- </p></dd>
- <dt>‘<samp>LemonChiffon</samp>’</dt>
- <dd><p>0xFFFACD
- </p></dd>
- <dt>‘<samp>LightBlue</samp>’</dt>
- <dd><p>0xADD8E6
- </p></dd>
- <dt>‘<samp>LightCoral</samp>’</dt>
- <dd><p>0xF08080
- </p></dd>
- <dt>‘<samp>LightCyan</samp>’</dt>
- <dd><p>0xE0FFFF
- </p></dd>
- <dt>‘<samp>LightGoldenRodYellow</samp>’</dt>
- <dd><p>0xFAFAD2
- </p></dd>
- <dt>‘<samp>LightGreen</samp>’</dt>
- <dd><p>0x90EE90
- </p></dd>
- <dt>‘<samp>LightGrey</samp>’</dt>
- <dd><p>0xD3D3D3
- </p></dd>
- <dt>‘<samp>LightPink</samp>’</dt>
- <dd><p>0xFFB6C1
- </p></dd>
- <dt>‘<samp>LightSalmon</samp>’</dt>
- <dd><p>0xFFA07A
- </p></dd>
- <dt>‘<samp>LightSeaGreen</samp>’</dt>
- <dd><p>0x20B2AA
- </p></dd>
- <dt>‘<samp>LightSkyBlue</samp>’</dt>
- <dd><p>0x87CEFA
- </p></dd>
- <dt>‘<samp>LightSlateGray</samp>’</dt>
- <dd><p>0x778899
- </p></dd>
- <dt>‘<samp>LightSteelBlue</samp>’</dt>
- <dd><p>0xB0C4DE
- </p></dd>
- <dt>‘<samp>LightYellow</samp>’</dt>
- <dd><p>0xFFFFE0
- </p></dd>
- <dt>‘<samp>Lime</samp>’</dt>
- <dd><p>0x00FF00
- </p></dd>
- <dt>‘<samp>LimeGreen</samp>’</dt>
- <dd><p>0x32CD32
- </p></dd>
- <dt>‘<samp>Linen</samp>’</dt>
- <dd><p>0xFAF0E6
- </p></dd>
- <dt>‘<samp>Magenta</samp>’</dt>
- <dd><p>0xFF00FF
- </p></dd>
- <dt>‘<samp>Maroon</samp>’</dt>
- <dd><p>0x800000
- </p></dd>
- <dt>‘<samp>MediumAquaMarine</samp>’</dt>
- <dd><p>0x66CDAA
- </p></dd>
- <dt>‘<samp>MediumBlue</samp>’</dt>
- <dd><p>0x0000CD
- </p></dd>
- <dt>‘<samp>MediumOrchid</samp>’</dt>
- <dd><p>0xBA55D3
- </p></dd>
- <dt>‘<samp>MediumPurple</samp>’</dt>
- <dd><p>0x9370D8
- </p></dd>
- <dt>‘<samp>MediumSeaGreen</samp>’</dt>
- <dd><p>0x3CB371
- </p></dd>
- <dt>‘<samp>MediumSlateBlue</samp>’</dt>
- <dd><p>0x7B68EE
- </p></dd>
- <dt>‘<samp>MediumSpringGreen</samp>’</dt>
- <dd><p>0x00FA9A
- </p></dd>
- <dt>‘<samp>MediumTurquoise</samp>’</dt>
- <dd><p>0x48D1CC
- </p></dd>
- <dt>‘<samp>MediumVioletRed</samp>’</dt>
- <dd><p>0xC71585
- </p></dd>
- <dt>‘<samp>MidnightBlue</samp>’</dt>
- <dd><p>0x191970
- </p></dd>
- <dt>‘<samp>MintCream</samp>’</dt>
- <dd><p>0xF5FFFA
- </p></dd>
- <dt>‘<samp>MistyRose</samp>’</dt>
- <dd><p>0xFFE4E1
- </p></dd>
- <dt>‘<samp>Moccasin</samp>’</dt>
- <dd><p>0xFFE4B5
- </p></dd>
- <dt>‘<samp>NavajoWhite</samp>’</dt>
- <dd><p>0xFFDEAD
- </p></dd>
- <dt>‘<samp>Navy</samp>’</dt>
- <dd><p>0x000080
- </p></dd>
- <dt>‘<samp>OldLace</samp>’</dt>
- <dd><p>0xFDF5E6
- </p></dd>
- <dt>‘<samp>Olive</samp>’</dt>
- <dd><p>0x808000
- </p></dd>
- <dt>‘<samp>OliveDrab</samp>’</dt>
- <dd><p>0x6B8E23
- </p></dd>
- <dt>‘<samp>Orange</samp>’</dt>
- <dd><p>0xFFA500
- </p></dd>
- <dt>‘<samp>OrangeRed</samp>’</dt>
- <dd><p>0xFF4500
- </p></dd>
- <dt>‘<samp>Orchid</samp>’</dt>
- <dd><p>0xDA70D6
- </p></dd>
- <dt>‘<samp>PaleGoldenRod</samp>’</dt>
- <dd><p>0xEEE8AA
- </p></dd>
- <dt>‘<samp>PaleGreen</samp>’</dt>
- <dd><p>0x98FB98
- </p></dd>
- <dt>‘<samp>PaleTurquoise</samp>’</dt>
- <dd><p>0xAFEEEE
- </p></dd>
- <dt>‘<samp>PaleVioletRed</samp>’</dt>
- <dd><p>0xD87093
- </p></dd>
- <dt>‘<samp>PapayaWhip</samp>’</dt>
- <dd><p>0xFFEFD5
- </p></dd>
- <dt>‘<samp>PeachPuff</samp>’</dt>
- <dd><p>0xFFDAB9
- </p></dd>
- <dt>‘<samp>Peru</samp>’</dt>
- <dd><p>0xCD853F
- </p></dd>
- <dt>‘<samp>Pink</samp>’</dt>
- <dd><p>0xFFC0CB
- </p></dd>
- <dt>‘<samp>Plum</samp>’</dt>
- <dd><p>0xDDA0DD
- </p></dd>
- <dt>‘<samp>PowderBlue</samp>’</dt>
- <dd><p>0xB0E0E6
- </p></dd>
- <dt>‘<samp>Purple</samp>’</dt>
- <dd><p>0x800080
- </p></dd>
- <dt>‘<samp>Red</samp>’</dt>
- <dd><p>0xFF0000
- </p></dd>
- <dt>‘<samp>RosyBrown</samp>’</dt>
- <dd><p>0xBC8F8F
- </p></dd>
- <dt>‘<samp>RoyalBlue</samp>’</dt>
- <dd><p>0x4169E1
- </p></dd>
- <dt>‘<samp>SaddleBrown</samp>’</dt>
- <dd><p>0x8B4513
- </p></dd>
- <dt>‘<samp>Salmon</samp>’</dt>
- <dd><p>0xFA8072
- </p></dd>
- <dt>‘<samp>SandyBrown</samp>’</dt>
- <dd><p>0xF4A460
- </p></dd>
- <dt>‘<samp>SeaGreen</samp>’</dt>
- <dd><p>0x2E8B57
- </p></dd>
- <dt>‘<samp>SeaShell</samp>’</dt>
- <dd><p>0xFFF5EE
- </p></dd>
- <dt>‘<samp>Sienna</samp>’</dt>
- <dd><p>0xA0522D
- </p></dd>
- <dt>‘<samp>Silver</samp>’</dt>
- <dd><p>0xC0C0C0
- </p></dd>
- <dt>‘<samp>SkyBlue</samp>’</dt>
- <dd><p>0x87CEEB
- </p></dd>
- <dt>‘<samp>SlateBlue</samp>’</dt>
- <dd><p>0x6A5ACD
- </p></dd>
- <dt>‘<samp>SlateGray</samp>’</dt>
- <dd><p>0x708090
- </p></dd>
- <dt>‘<samp>Snow</samp>’</dt>
- <dd><p>0xFFFAFA
- </p></dd>
- <dt>‘<samp>SpringGreen</samp>’</dt>
- <dd><p>0x00FF7F
- </p></dd>
- <dt>‘<samp>SteelBlue</samp>’</dt>
- <dd><p>0x4682B4
- </p></dd>
- <dt>‘<samp>Tan</samp>’</dt>
- <dd><p>0xD2B48C
- </p></dd>
- <dt>‘<samp>Teal</samp>’</dt>
- <dd><p>0x008080
- </p></dd>
- <dt>‘<samp>Thistle</samp>’</dt>
- <dd><p>0xD8BFD8
- </p></dd>
- <dt>‘<samp>Tomato</samp>’</dt>
- <dd><p>0xFF6347
- </p></dd>
- <dt>‘<samp>Turquoise</samp>’</dt>
- <dd><p>0x40E0D0
- </p></dd>
- <dt>‘<samp>Violet</samp>’</dt>
- <dd><p>0xEE82EE
- </p></dd>
- <dt>‘<samp>Wheat</samp>’</dt>
- <dd><p>0xF5DEB3
- </p></dd>
- <dt>‘<samp>White</samp>’</dt>
- <dd><p>0xFFFFFF
- </p></dd>
- <dt>‘<samp>WhiteSmoke</samp>’</dt>
- <dd><p>0xF5F5F5
- </p></dd>
- <dt>‘<samp>Yellow</samp>’</dt>
- <dd><p>0xFFFF00
- </p></dd>
- <dt>‘<samp>YellowGreen</samp>’</dt>
- <dd><p>0x9ACD32
- </p></dd>
- </dl>
-
- <p><a name="channel-layout-syntax"></a>
- </p><a name="Channel-Layout"></a>
- <h2 class="section"><a href="ffmpeg-utils.html#toc-Channel-Layout">2.8 Channel Layout</a></h2>
-
- <p>A channel layout specifies the spatial disposition of the channels in
- a multi-channel audio stream. To specify a channel layout, FFmpeg
- makes use of a special syntax.
- </p>
- <p>Individual channels are identified by an id, as given by the table
- below:
- </p><dl compact="compact">
- <dt>‘<samp>FL</samp>’</dt>
- <dd><p>front left
- </p></dd>
- <dt>‘<samp>FR</samp>’</dt>
- <dd><p>front right
- </p></dd>
- <dt>‘<samp>FC</samp>’</dt>
- <dd><p>front center
- </p></dd>
- <dt>‘<samp>LFE</samp>’</dt>
- <dd><p>low frequency
- </p></dd>
- <dt>‘<samp>BL</samp>’</dt>
- <dd><p>back left
- </p></dd>
- <dt>‘<samp>BR</samp>’</dt>
- <dd><p>back right
- </p></dd>
- <dt>‘<samp>FLC</samp>’</dt>
- <dd><p>front left-of-center
- </p></dd>
- <dt>‘<samp>FRC</samp>’</dt>
- <dd><p>front right-of-center
- </p></dd>
- <dt>‘<samp>BC</samp>’</dt>
- <dd><p>back center
- </p></dd>
- <dt>‘<samp>SL</samp>’</dt>
- <dd><p>side left
- </p></dd>
- <dt>‘<samp>SR</samp>’</dt>
- <dd><p>side right
- </p></dd>
- <dt>‘<samp>TC</samp>’</dt>
- <dd><p>top center
- </p></dd>
- <dt>‘<samp>TFL</samp>’</dt>
- <dd><p>top front left
- </p></dd>
- <dt>‘<samp>TFC</samp>’</dt>
- <dd><p>top front center
- </p></dd>
- <dt>‘<samp>TFR</samp>’</dt>
- <dd><p>top front right
- </p></dd>
- <dt>‘<samp>TBL</samp>’</dt>
- <dd><p>top back left
- </p></dd>
- <dt>‘<samp>TBC</samp>’</dt>
- <dd><p>top back center
- </p></dd>
- <dt>‘<samp>TBR</samp>’</dt>
- <dd><p>top back right
- </p></dd>
- <dt>‘<samp>DL</samp>’</dt>
- <dd><p>downmix left
- </p></dd>
- <dt>‘<samp>DR</samp>’</dt>
- <dd><p>downmix right
- </p></dd>
- <dt>‘<samp>WL</samp>’</dt>
- <dd><p>wide left
- </p></dd>
- <dt>‘<samp>WR</samp>’</dt>
- <dd><p>wide right
- </p></dd>
- <dt>‘<samp>SDL</samp>’</dt>
- <dd><p>surround direct left
- </p></dd>
- <dt>‘<samp>SDR</samp>’</dt>
- <dd><p>surround direct right
- </p></dd>
- <dt>‘<samp>LFE2</samp>’</dt>
- <dd><p>low frequency 2
- </p></dd>
- </dl>
-
- <p>Standard channel layout compositions can be specified by using the
- following identifiers:
- </p><dl compact="compact">
- <dt>‘<samp>mono</samp>’</dt>
- <dd><p>FC
- </p></dd>
- <dt>‘<samp>stereo</samp>’</dt>
- <dd><p>FL+FR
- </p></dd>
- <dt>‘<samp>2.1</samp>’</dt>
- <dd><p>FL+FR+LFE
- </p></dd>
- <dt>‘<samp>3.0</samp>’</dt>
- <dd><p>FL+FR+FC
- </p></dd>
- <dt>‘<samp>3.0(back)</samp>’</dt>
- <dd><p>FL+FR+BC
- </p></dd>
- <dt>‘<samp>4.0</samp>’</dt>
- <dd><p>FL+FR+FC+BC
- </p></dd>
- <dt>‘<samp>quad</samp>’</dt>
- <dd><p>FL+FR+BL+BR
- </p></dd>
- <dt>‘<samp>quad(side)</samp>’</dt>
- <dd><p>FL+FR+SL+SR
- </p></dd>
- <dt>‘<samp>3.1</samp>’</dt>
- <dd><p>FL+FR+FC+LFE
- </p></dd>
- <dt>‘<samp>5.0</samp>’</dt>
- <dd><p>FL+FR+FC+BL+BR
- </p></dd>
- <dt>‘<samp>5.0(side)</samp>’</dt>
- <dd><p>FL+FR+FC+SL+SR
- </p></dd>
- <dt>‘<samp>4.1</samp>’</dt>
- <dd><p>FL+FR+FC+LFE+BC
- </p></dd>
- <dt>‘<samp>5.1</samp>’</dt>
- <dd><p>FL+FR+FC+LFE+BL+BR
- </p></dd>
- <dt>‘<samp>5.1(side)</samp>’</dt>
- <dd><p>FL+FR+FC+LFE+SL+SR
- </p></dd>
- <dt>‘<samp>6.0</samp>’</dt>
- <dd><p>FL+FR+FC+BC+SL+SR
- </p></dd>
- <dt>‘<samp>6.0(front)</samp>’</dt>
- <dd><p>FL+FR+FLC+FRC+SL+SR
- </p></dd>
- <dt>‘<samp>hexagonal</samp>’</dt>
- <dd><p>FL+FR+FC+BL+BR+BC
- </p></dd>
- <dt>‘<samp>6.1</samp>’</dt>
- <dd><p>FL+FR+FC+LFE+BC+SL+SR
- </p></dd>
- <dt>‘<samp>6.1</samp>’</dt>
- <dd><p>FL+FR+FC+LFE+BL+BR+BC
- </p></dd>
- <dt>‘<samp>6.1(front)</samp>’</dt>
- <dd><p>FL+FR+LFE+FLC+FRC+SL+SR
- </p></dd>
- <dt>‘<samp>7.0</samp>’</dt>
- <dd><p>FL+FR+FC+BL+BR+SL+SR
- </p></dd>
- <dt>‘<samp>7.0(front)</samp>’</dt>
- <dd><p>FL+FR+FC+FLC+FRC+SL+SR
- </p></dd>
- <dt>‘<samp>7.1</samp>’</dt>
- <dd><p>FL+FR+FC+LFE+BL+BR+SL+SR
- </p></dd>
- <dt>‘<samp>7.1(wide)</samp>’</dt>
- <dd><p>FL+FR+FC+LFE+BL+BR+FLC+FRC
- </p></dd>
- <dt>‘<samp>7.1(wide-side)</samp>’</dt>
- <dd><p>FL+FR+FC+LFE+FLC+FRC+SL+SR
- </p></dd>
- <dt>‘<samp>octagonal</samp>’</dt>
- <dd><p>FL+FR+FC+BL+BR+BC+SL+SR
- </p></dd>
- <dt>‘<samp>hexadecagonal</samp>’</dt>
- <dd><p>FL+FR+FC+BL+BR+BC+SL+SR+WL+WR+TBL+TBR+TBC+TFC+TFL+TFR
- </p></dd>
- <dt>‘<samp>downmix</samp>’</dt>
- <dd><p>DL+DR
- </p></dd>
- </dl>
-
- <p>A custom channel layout can be specified as a sequence of terms, separated by
- ’+’ or ’|’. Each term can be:
- </p><ul>
- <li>
- the name of a standard channel layout (e.g. ‘<samp>mono</samp>’,
- ‘<samp>stereo</samp>’, ‘<samp>4.0</samp>’, ‘<samp>quad</samp>’, ‘<samp>5.0</samp>’, etc.)
-
- </li><li>
- the name of a single channel (e.g. ‘<samp>FL</samp>’, ‘<samp>FR</samp>’, ‘<samp>FC</samp>’, ‘<samp>LFE</samp>’, etc.)
-
- </li><li>
- a number of channels, in decimal, followed by ’c’, yielding the default channel
- layout for that number of channels (see the function
- <code>av_get_default_channel_layout</code>). Note that not all channel counts have a
- default layout.
-
- </li><li>
- a number of channels, in decimal, followed by ’C’, yielding an unknown channel
- layout with the specified number of channels. Note that not all channel layout
- specification strings support unknown channel layouts.
-
- </li><li>
- a channel layout mask, in hexadecimal starting with "0x" (see the
- <code>AV_CH_*</code> macros in ‘<tt>libavutil/channel_layout.h</tt>’.
- </li></ul>
-
- <p>Before libavutil version 53 the trailing character "c" to specify a number of
- channels was optional, but now it is required, while a channel layout mask can
- also be specified as a decimal number (if and only if not followed by "c" or "C").
- </p>
- <p>See also the function <code>av_get_channel_layout</code> defined in
- ‘<tt>libavutil/channel_layout.h</tt>’.
- </p>
- <a name="Expression-Evaluation"></a>
- <h1 class="chapter"><a href="ffmpeg-utils.html#toc-Expression-Evaluation">3 Expression Evaluation</a></h1>
-
- <p>When evaluating an arithmetic expression, FFmpeg uses an internal
- formula evaluator, implemented through the ‘<tt>libavutil/eval.h</tt>’
- interface.
- </p>
- <p>An expression may contain unary, binary operators, constants, and
- functions.
- </p>
- <p>Two expressions <var>expr1</var> and <var>expr2</var> can be combined to form
- another expression "<var>expr1</var>;<var>expr2</var>".
- <var>expr1</var> and <var>expr2</var> are evaluated in turn, and the new
- expression evaluates to the value of <var>expr2</var>.
- </p>
- <p>The following binary operators are available: <code>+</code>, <code>-</code>,
- <code>*</code>, <code>/</code>, <code>^</code>.
- </p>
- <p>The following unary operators are available: <code>+</code>, <code>-</code>.
- </p>
- <p>The following functions are available:
- </p><dl compact="compact">
- <dt>‘<samp>abs(x)</samp>’</dt>
- <dd><p>Compute absolute value of <var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>acos(x)</samp>’</dt>
- <dd><p>Compute arccosine of <var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>asin(x)</samp>’</dt>
- <dd><p>Compute arcsine of <var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>atan(x)</samp>’</dt>
- <dd><p>Compute arctangent of <var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>atan2(x, y)</samp>’</dt>
- <dd><p>Compute principal value of the arc tangent of <var>y</var>/<var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>between(x, min, max)</samp>’</dt>
- <dd><p>Return 1 if <var>x</var> is greater than or equal to <var>min</var> and lesser than or
- equal to <var>max</var>, 0 otherwise.
- </p>
- </dd>
- <dt>‘<samp>bitand(x, y)</samp>’</dt>
- <dt>‘<samp>bitor(x, y)</samp>’</dt>
- <dd><p>Compute bitwise and/or operation on <var>x</var> and <var>y</var>.
- </p>
- <p>The results of the evaluation of <var>x</var> and <var>y</var> are converted to
- integers before executing the bitwise operation.
- </p>
- <p>Note that both the conversion to integer and the conversion back to
- floating point can lose precision. Beware of unexpected results for
- large numbers (usually 2^53 and larger).
- </p>
- </dd>
- <dt>‘<samp>ceil(expr)</samp>’</dt>
- <dd><p>Round the value of expression <var>expr</var> upwards to the nearest
- integer. For example, "ceil(1.5)" is "2.0".
- </p>
- </dd>
- <dt>‘<samp>clip(x, min, max)</samp>’</dt>
- <dd><p>Return the value of <var>x</var> clipped between <var>min</var> and <var>max</var>.
- </p>
- </dd>
- <dt>‘<samp>cos(x)</samp>’</dt>
- <dd><p>Compute cosine of <var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>cosh(x)</samp>’</dt>
- <dd><p>Compute hyperbolic cosine of <var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>eq(x, y)</samp>’</dt>
- <dd><p>Return 1 if <var>x</var> and <var>y</var> are equivalent, 0 otherwise.
- </p>
- </dd>
- <dt>‘<samp>exp(x)</samp>’</dt>
- <dd><p>Compute exponential of <var>x</var> (with base <code>e</code>, the Euler’s number).
- </p>
- </dd>
- <dt>‘<samp>floor(expr)</samp>’</dt>
- <dd><p>Round the value of expression <var>expr</var> downwards to the nearest
- integer. For example, "floor(-1.5)" is "-2.0".
- </p>
- </dd>
- <dt>‘<samp>gauss(x)</samp>’</dt>
- <dd><p>Compute Gauss function of <var>x</var>, corresponding to
- <code>exp(-x*x/2) / sqrt(2*PI)</code>.
- </p>
- </dd>
- <dt>‘<samp>gcd(x, y)</samp>’</dt>
- <dd><p>Return the greatest common divisor of <var>x</var> and <var>y</var>. If both <var>x</var> and
- <var>y</var> are 0 or either or both are less than zero then behavior is undefined.
- </p>
- </dd>
- <dt>‘<samp>gt(x, y)</samp>’</dt>
- <dd><p>Return 1 if <var>x</var> is greater than <var>y</var>, 0 otherwise.
- </p>
- </dd>
- <dt>‘<samp>gte(x, y)</samp>’</dt>
- <dd><p>Return 1 if <var>x</var> is greater than or equal to <var>y</var>, 0 otherwise.
- </p>
- </dd>
- <dt>‘<samp>hypot(x, y)</samp>’</dt>
- <dd><p>This function is similar to the C function with the same name; it returns
- "sqrt(<var>x</var>*<var>x</var> + <var>y</var>*<var>y</var>)", the length of the hypotenuse of a
- right triangle with sides of length <var>x</var> and <var>y</var>, or the distance of the
- point (<var>x</var>, <var>y</var>) from the origin.
- </p>
- </dd>
- <dt>‘<samp>if(x, y)</samp>’</dt>
- <dd><p>Evaluate <var>x</var>, and if the result is non-zero return the result of
- the evaluation of <var>y</var>, return 0 otherwise.
- </p>
- </dd>
- <dt>‘<samp>if(x, y, z)</samp>’</dt>
- <dd><p>Evaluate <var>x</var>, and if the result is non-zero return the evaluation
- result of <var>y</var>, otherwise the evaluation result of <var>z</var>.
- </p>
- </dd>
- <dt>‘<samp>ifnot(x, y)</samp>’</dt>
- <dd><p>Evaluate <var>x</var>, and if the result is zero return the result of the
- evaluation of <var>y</var>, return 0 otherwise.
- </p>
- </dd>
- <dt>‘<samp>ifnot(x, y, z)</samp>’</dt>
- <dd><p>Evaluate <var>x</var>, and if the result is zero return the evaluation
- result of <var>y</var>, otherwise the evaluation result of <var>z</var>.
- </p>
- </dd>
- <dt>‘<samp>isinf(x)</samp>’</dt>
- <dd><p>Return 1.0 if <var>x</var> is +/-INFINITY, 0.0 otherwise.
- </p>
- </dd>
- <dt>‘<samp>isnan(x)</samp>’</dt>
- <dd><p>Return 1.0 if <var>x</var> is NAN, 0.0 otherwise.
- </p>
- </dd>
- <dt>‘<samp>ld(var)</samp>’</dt>
- <dd><p>Load the value of the internal variable with number
- <var>var</var>, which was previously stored with st(<var>var</var>, <var>expr</var>).
- The function returns the loaded value.
- </p>
- </dd>
- <dt>‘<samp>lerp(x, y, z)</samp>’</dt>
- <dd><p>Return linear interpolation between <var>x</var> and <var>y</var> by amount of <var>z</var>.
- </p>
- </dd>
- <dt>‘<samp>log(x)</samp>’</dt>
- <dd><p>Compute natural logarithm of <var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>lt(x, y)</samp>’</dt>
- <dd><p>Return 1 if <var>x</var> is lesser than <var>y</var>, 0 otherwise.
- </p>
- </dd>
- <dt>‘<samp>lte(x, y)</samp>’</dt>
- <dd><p>Return 1 if <var>x</var> is lesser than or equal to <var>y</var>, 0 otherwise.
- </p>
- </dd>
- <dt>‘<samp>max(x, y)</samp>’</dt>
- <dd><p>Return the maximum between <var>x</var> and <var>y</var>.
- </p>
- </dd>
- <dt>‘<samp>min(x, y)</samp>’</dt>
- <dd><p>Return the minimum between <var>x</var> and <var>y</var>.
- </p>
- </dd>
- <dt>‘<samp>mod(x, y)</samp>’</dt>
- <dd><p>Compute the remainder of division of <var>x</var> by <var>y</var>.
- </p>
- </dd>
- <dt>‘<samp>not(expr)</samp>’</dt>
- <dd><p>Return 1.0 if <var>expr</var> is zero, 0.0 otherwise.
- </p>
- </dd>
- <dt>‘<samp>pow(x, y)</samp>’</dt>
- <dd><p>Compute the power of <var>x</var> elevated <var>y</var>, it is equivalent to
- "(<var>x</var>)^(<var>y</var>)".
- </p>
- </dd>
- <dt>‘<samp>print(t)</samp>’</dt>
- <dt>‘<samp>print(t, l)</samp>’</dt>
- <dd><p>Print the value of expression <var>t</var> with loglevel <var>l</var>. If
- <var>l</var> is not specified then a default log level is used.
- Returns the value of the expression printed.
- </p>
- <p>Prints t with loglevel l
- </p>
- </dd>
- <dt>‘<samp>random(x)</samp>’</dt>
- <dd><p>Return a pseudo random value between 0.0 and 1.0. <var>x</var> is the index of the
- internal variable which will be used to save the seed/state.
- </p>
- </dd>
- <dt>‘<samp>root(expr, max)</samp>’</dt>
- <dd><p>Find an input value for which the function represented by <var>expr</var>
- with argument <var>ld(0)</var> is 0 in the interval 0..<var>max</var>.
- </p>
- <p>The expression in <var>expr</var> must denote a continuous function or the
- result is undefined.
- </p>
- <p><var>ld(0)</var> is used to represent the function input value, which means
- that the given expression will be evaluated multiple times with
- various input values that the expression can access through
- <code>ld(0)</code>. When the expression evaluates to 0 then the
- corresponding input value will be returned.
- </p>
- </dd>
- <dt>‘<samp>round(expr)</samp>’</dt>
- <dd><p>Round the value of expression <var>expr</var> to the nearest integer. For example, "round(1.5)" is "2.0".
- </p>
- </dd>
- <dt>‘<samp>sgn(x)</samp>’</dt>
- <dd><p>Compute sign of <var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>sin(x)</samp>’</dt>
- <dd><p>Compute sine of <var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>sinh(x)</samp>’</dt>
- <dd><p>Compute hyperbolic sine of <var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>sqrt(expr)</samp>’</dt>
- <dd><p>Compute the square root of <var>expr</var>. This is equivalent to
- "(<var>expr</var>)^.5".
- </p>
- </dd>
- <dt>‘<samp>squish(x)</samp>’</dt>
- <dd><p>Compute expression <code>1/(1 + exp(4*x))</code>.
- </p>
- </dd>
- <dt>‘<samp>st(var, expr)</samp>’</dt>
- <dd><p>Store the value of the expression <var>expr</var> in an internal
- variable. <var>var</var> specifies the number of the variable where to
- store the value, and it is a value ranging from 0 to 9. The function
- returns the value stored in the internal variable.
- Note, Variables are currently not shared between expressions.
- </p>
- </dd>
- <dt>‘<samp>tan(x)</samp>’</dt>
- <dd><p>Compute tangent of <var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>tanh(x)</samp>’</dt>
- <dd><p>Compute hyperbolic tangent of <var>x</var>.
- </p>
- </dd>
- <dt>‘<samp>taylor(expr, x)</samp>’</dt>
- <dt>‘<samp>taylor(expr, x, id)</samp>’</dt>
- <dd><p>Evaluate a Taylor series at <var>x</var>, given an expression representing
- the <code>ld(id)</code>-th derivative of a function at 0.
- </p>
- <p>When the series does not converge the result is undefined.
- </p>
- <p><var>ld(id)</var> is used to represent the derivative order in <var>expr</var>,
- which means that the given expression will be evaluated multiple times
- with various input values that the expression can access through
- <code>ld(id)</code>. If <var>id</var> is not specified then 0 is assumed.
- </p>
- <p>Note, when you have the derivatives at y instead of 0,
- <code>taylor(expr, x-y)</code> can be used.
- </p>
- </dd>
- <dt>‘<samp>time(0)</samp>’</dt>
- <dd><p>Return the current (wallclock) time in seconds.
- </p>
- </dd>
- <dt>‘<samp>trunc(expr)</samp>’</dt>
- <dd><p>Round the value of expression <var>expr</var> towards zero to the nearest
- integer. For example, "trunc(-1.5)" is "-1.0".
- </p>
- </dd>
- <dt>‘<samp>while(cond, expr)</samp>’</dt>
- <dd><p>Evaluate expression <var>expr</var> while the expression <var>cond</var> is
- non-zero, and returns the value of the last <var>expr</var> evaluation, or
- NAN if <var>cond</var> was always false.
- </p></dd>
- </dl>
-
- <p>The following constants are available:
- </p><dl compact="compact">
- <dt>‘<samp>PI</samp>’</dt>
- <dd><p>area of the unit disc, approximately 3.14
- </p></dd>
- <dt>‘<samp>E</samp>’</dt>
- <dd><p>exp(1) (Euler’s number), approximately 2.718
- </p></dd>
- <dt>‘<samp>PHI</samp>’</dt>
- <dd><p>golden ratio (1+sqrt(5))/2, approximately 1.618
- </p></dd>
- </dl>
-
- <p>Assuming that an expression is considered "true" if it has a non-zero
- value, note that:
- </p>
- <p><code>*</code> works like AND
- </p>
- <p><code>+</code> works like OR
- </p>
- <p>For example the construct:
- </p><div class="example">
- <pre class="example">if (A AND B) then C
- </pre></div>
- <p>is equivalent to:
- </p><div class="example">
- <pre class="example">if(A*B, C)
- </pre></div>
-
- <p>In your C code, you can extend the list of unary and binary functions,
- and define recognized constants, so that they are available for your
- expressions.
- </p>
- <p>The evaluator also recognizes the International System unit prefixes.
- If ’i’ is appended after the prefix, binary prefixes are used, which
- are based on powers of 1024 instead of powers of 1000.
- The ’B’ postfix multiplies the value by 8, and can be appended after a
- unit prefix or used alone. This allows using for example ’KB’, ’MiB’,
- ’G’ and ’B’ as number postfix.
- </p>
- <p>The list of available International System prefixes follows, with
- indication of the corresponding powers of 10 and of 2.
- </p><dl compact="compact">
- <dt>‘<samp>y</samp>’</dt>
- <dd><p>10^-24 / 2^-80
- </p></dd>
- <dt>‘<samp>z</samp>’</dt>
- <dd><p>10^-21 / 2^-70
- </p></dd>
- <dt>‘<samp>a</samp>’</dt>
- <dd><p>10^-18 / 2^-60
- </p></dd>
- <dt>‘<samp>f</samp>’</dt>
- <dd><p>10^-15 / 2^-50
- </p></dd>
- <dt>‘<samp>p</samp>’</dt>
- <dd><p>10^-12 / 2^-40
- </p></dd>
- <dt>‘<samp>n</samp>’</dt>
- <dd><p>10^-9 / 2^-30
- </p></dd>
- <dt>‘<samp>u</samp>’</dt>
- <dd><p>10^-6 / 2^-20
- </p></dd>
- <dt>‘<samp>m</samp>’</dt>
- <dd><p>10^-3 / 2^-10
- </p></dd>
- <dt>‘<samp>c</samp>’</dt>
- <dd><p>10^-2
- </p></dd>
- <dt>‘<samp>d</samp>’</dt>
- <dd><p>10^-1
- </p></dd>
- <dt>‘<samp>h</samp>’</dt>
- <dd><p>10^2
- </p></dd>
- <dt>‘<samp>k</samp>’</dt>
- <dd><p>10^3 / 2^10
- </p></dd>
- <dt>‘<samp>K</samp>’</dt>
- <dd><p>10^3 / 2^10
- </p></dd>
- <dt>‘<samp>M</samp>’</dt>
- <dd><p>10^6 / 2^20
- </p></dd>
- <dt>‘<samp>G</samp>’</dt>
- <dd><p>10^9 / 2^30
- </p></dd>
- <dt>‘<samp>T</samp>’</dt>
- <dd><p>10^12 / 2^40
- </p></dd>
- <dt>‘<samp>P</samp>’</dt>
- <dd><p>10^15 / 2^40
- </p></dd>
- <dt>‘<samp>E</samp>’</dt>
- <dd><p>10^18 / 2^50
- </p></dd>
- <dt>‘<samp>Z</samp>’</dt>
- <dd><p>10^21 / 2^60
- </p></dd>
- <dt>‘<samp>Y</samp>’</dt>
- <dd><p>10^24 / 2^70
- </p></dd>
- </dl>
-
-
- <a name="See-Also"></a>
- <h1 class="chapter"><a href="ffmpeg-utils.html#toc-See-Also">4 See Also</a></h1>
-
- <p><a href="ffmpeg.html">ffmpeg</a>, <a href="ffplay.html">ffplay</a>, <a href="ffprobe.html">ffprobe</a>,
- <a href="libavutil.html">libavutil</a>
- </p>
-
- <a name="Authors"></a>
- <h1 class="chapter"><a href="ffmpeg-utils.html#toc-Authors">5 Authors</a></h1>
-
- <p>The FFmpeg developers.
- </p>
- <p>For details about the authorship, see the Git history of the project
- (git://source.ffmpeg.org/ffmpeg), e.g. by typing the command
- <code>git log</code> in the FFmpeg source directory, or browsing the
- online repository at <a href="http://source.ffmpeg.org">http://source.ffmpeg.org</a>.
- </p>
- <p>Maintainers for the specific components are listed in the file
- ‘<tt>MAINTAINERS</tt>’ in the source code tree.
- </p>
-
- </div>
- </body>
- </html>
|